F4 matched FET's - Page 21

judo · 13th October 2008, 09:40 AM

Dear and kind Tarasque (and the Fans),

After another three months: no fets, no money, not a word. Would you be more kind please paying my money (with interest) back?

judo (the rude)

Audiofanatic · 13th October 2008, 01:37 PM

Hi Judo,

With all due respect.

But this is not nice to say to a fellow forum member.

If you think your case is the worst around here, than I got news for you.

I've orderd a few YEARS ago a set of Two Ribbon tweeters from a guy in Afrika (DIYAudio.com) and payed it withing a few minutes but until now, no tweeters no money no nothing, and I'm not the only one.
Aurum Cantus G2Si Ribbon Tweeter group buy

But to be claiming your money back "with Interest" is not the way to do this and Tarasque doesn't deserve this kind of posts.

He's a nice guy and help us all and doesn't deserve to be treated this way.

You are free to say and do what you want but I urge you to be patience and not to demand anything, this is not nice to Tarasque.

Tarasque is a nice guy who is helping us with the fet's and I don't think you need to talk/ write this way.

Just my 2 cents.

Best regards,

Audiofanatic

chrismercurio · 13th October 2008, 02:50 PM

I'm sure there is an explanation. Tarasque has offered this to people for years without problems. Delays sure....but perhaps PM him instead of publicly smearing him?

Nobody likes to be thrown under the proverbial bus especially when all you really want from them is help.

Chris

korben69 · 13th October 2008, 03:35 PM

Judo, please don't be so rude with Tarasque.
He's doing his best for us, as you can read there, he's got a lot of trouble in sourcing Mosfet from same batches/country :

http://www.diyaudio.com/forums/showt...15#post1627015

Tarasque · 13th October 2008, 05:33 PM

Thank you all for your kind words. Yes, I know that there are some that are waiting for a couple of month.

The situation is that I've measured over 1600 IRFP240 fets and have returned quite a bit of fets to my supplyers who are becomming pissed off as well.

I know it is hard to ask: pls bare with me some more as I will find a solution.

judo · 14th October 2008, 02:59 PM

I did not ask any help from Tarasque only asked how much and sent the money. I thought I had bought these parts and started collecting the others you can see it was almost half a year ago. Not my first diy project, not the tenth but I had not similar "help" until now. This is ridiculous and revolting at the same time the procedure itself not the consequences. The promise has to keep not the money.
I am reliable too, send me 104 euros I can promise not giving them back.
I do not think this type of "business" is good for diyaudio.

13th October 2008, 01:37 PM	#202
Audiofanatic diyAudio Member Join Date: Oct 2002 Location: The Netherlands, Utrecht	Judo Hi Judo, With all due respect. But this is not nice to say to a fellow forum member. If you think your case is the worst around here, than I got news for you. I've orderd a few YEARS ago a set of Two Ribbon tweeters from a guy in Afrika (DIYAudio.com) and payed it withing a few minutes but until now, no tweeters no money no nothing, and I'm not the only one. Aurum Cantus G2Si Ribbon Tweeter group buy But to be claiming your money back "with Interest" is not the way to do this and Tarasque doesn't deserve this kind of posts. He's a nice guy and help us all and doesn't deserve to be treated this way. You are free to say and do what you want but I urge you to be patience and not to demand anything, this is not nice to Tarasque. Tarasque is a nice guy who is helping us with the fet's and I don't think you need to talk/ write this way. Just my 2 cents. Best regards, Audiofanatic __________________ Be nice to animals.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Matched IRF FET's	Tarasque	Swap Meet	219	27th February 2011 10:58 PM
Matched tubes or not matched	hilbert_mostert	Tubes / Valves	29	27th March 2009 10:13 PM
Matched JFETs	suzyj	Solid State	8	22nd August 2007 02:10 AM
what needs to be matched in an aleph-p 1.7?	jarthel	Pass Labs	4	9th July 2007 12:05 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th October 2008, 09:40 AM	#201
judo diyAudio Member Join Date: Oct 2003 Location: hungary	Dear and kind Tarasque (and the Fans), After another three months: no fets, no money, not a word. Would you be more kind please paying my money (with interest) back? judo (the rude)

13th October 2008, 02:50 PM	#203
chrismercurio diyAudio Member Join Date: Aug 2006 Location: Silicon Valley	I'm sure there is an explanation. Tarasque has offered this to people for years without problems. Delays sure....but perhaps PM him instead of publicly smearing him? Nobody likes to be thrown under the proverbial bus especially when all you really want from them is help. Chris

13th October 2008, 03:35 PM	#204
korben69 diyAudio Member Join Date: Nov 2006 Location: Near Lyon	Judo, please don't be so rude with Tarasque. He's doing his best for us, as you can read there, he's got a lot of trouble in sourcing Mosfet from same batches/country : http://www.diyaudio.com/forums/showt...15#post1627015

13th October 2008, 05:33 PM	#205
Tarasque diyAudio Member Join Date: Dec 2002 Location: Netherlands	Thank you all for your kind words. Yes, I know that there are some that are waiting for a couple of month. The situation is that I've measured over 1600 IRFP240 fets and have returned quite a bit of fets to my supplyers who are becomming pissed off as well. I know it is hard to ask: pls bare with me some more as I will find a solution.

14th October 2008, 02:59 PM	#206
judo diyAudio Member Join Date: Oct 2003 Location: hungary	I did not ask any help from Tarasque only asked how much and sent the money. I thought I had bought these parts and started collecting the others you can see it was almost half a year ago. Not my first diy project, not the tenth but I had not similar "help" until now. This is ridiculous and revolting at the same time the procedure itself not the consequences. The promise has to keep not the money. I am reliable too, send me 104 euros I can promise not giving them back. I do not think this type of "business" is good for diyaudio.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)