diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Group Buys (http://www.diyaudio.com/forums/group-buys/)
-   -   BPA300 mono block (http://www.diyaudio.com/forums/group-buys/103431-bpa300-mono-block.html)

alexw88 14th May 2007 03:44 AM

I have got emails about the buying the PA150 PCB. I only have a few left. If there are enough interest I may be able to make some more.

Please reply here if you are interested in the PCB. If the total number is > 40 PCBs, the cost would be about $10 per PCB. Shipping would be extra.

HIPCHECK 14th May 2007 08:12 AM

I will be glad to donate some Vishay/Dale WSR 0.3R 2W 1% resistors to everybody (3x40 PCB I guess) who ordered a pcb. I would like to build a BPA style amp, and this is the most complete pcb I have seen before. Alex I would really like to help in getting this pcb available to DIY builders.

my only concern would be adding a additional pad/footprint for other size input caps for C1. just to provide options.


I am interested in 6-10 pcb's really just depends. I cannot commit to all 10 at this time.

tryonziess 14th May 2007 11:28 AM

alex, i would like six boards. let me know if you want the money upfront. thanks

alexcd 14th May 2007 12:44 PM

Does a single PCB 50% or 100% of a mono amp? i.e. How many would I need to buy to build 6 amps?

If you dont mind saying, how much did you pay for those cases? They look phenomenal but I can't read/write Chinese to order them. Maybe you could help do a second group buy if they are reasonably priced.

alexcd 14th May 2007 12:58 PM

Are we on our own for DRV134 PCB's? That isn't as big of a deal I guess.

HIPCHECK 14th May 2007 01:08 PM

the DRV should be simple enough.you can p2p on proto-perf board......... I have several pcb for the DRV from digi01 still, and have balanced out from my DCX crossover. maybe someone will try with the twisted pear txd pcb?

I have the resistors (0.3 2w 1%)for the pa150 amp, ill see if I cant scrounge up the required SMT caps/resistors, and trim pots.


alexcd 14th May 2007 01:17 PM

These are going to be so great. Can anyone answer my other question about the PCB's being a half or whole mono amp?

alexw88 14th May 2007 01:38 PM

alexcd, you need 2 PCBs for a mono amp. For a stereo amp you need 4 PCBs.

For the cases I can't help here, as I am not satisfy with the web site that I ordered from. (www.my3c.net)

alexw88 14th May 2007 02:09 PM

Quote:

Originally posted by HIPCHECK
my only concern would be adding a additional pad/footprint for other size input caps for C1. just to provide options.

I could make it like this :

http://www.shine7.com/audio/pa150-2_front.jpg

http://www.shine7.com/audio/pa150-2_back.jpg

But if possible I don't want to change anything because my original board is tested and measured to be good. I just don't want to make any silly mistake on a 40+ PCB order.

alexcd 14th May 2007 02:14 PM

I don't think that change is important enough. Leads should bend enough to reach the existing holes in most cases anyhow. No?


All times are GMT. The time now is 09:17 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2