Components group buy for Pavel Dudek's super Gainclone - Page 3

EvilYoda · 16th May 2007, 05:38 PM

Apparently I never wrote on the wiki, odd...so make that 39 sets total.

Shaun · 17th May 2007, 07:28 AM

Post 5: http://www.diyaudio.com/forums/showt...61#post1205361

Quote:

Originally posted by ex007
I'v been quit busy for a couple of days so I have not had time to do much. I aim to buy smaler and simpler parts in this group buy, resistors and perhaps ceramic and foil capacitors, depending of intrest.

I need atleast 35 partisepents to get the price optimaly low and can do maximum 40 packages.

All resistors for one board cost about 35 SEK + shiping and paypalfees.
The resistors is metalfilm type, 1%.

I would like you to include additionally the relays and terminal blocks (at least). The parts you mention here are not really that expensive, and I don't expect there to be much cost advantage gained from buying just these. For me, my interest in this GB is all about convenience: it takes quite an effort to go and buy all those parts. So the saving on the cost of the parts might to some extent offset shipping costs.

It would help a lot if you could clarify your intentions as some (including myself) have expressed a desire for various parts to be included. I don't mean to be ungrateful; I appreciate the immense favour you are doing by arranging this GB.

Edit (premature submission):

And I know that you are busy, so no pressure intended. I just want to know whether you are going to explore offering a more complete set of parts.

ex007 · 19th May 2007, 01:22 PM

I'v added a lot of components for the group buy with prices for indvdual category, all prices are calculated for 40 sets, and I should be able to cover all preliminary sets until now.
See group buy wiki

I'v been looking at diferent relays and they are quit expensive sins I'm not exactly sure of the footings I'v not listed them in the group buy. For two relays of 12V 16 A the price would becom 47 SEK.

Aengus · 19th May 2007, 07:12 PM

Any additional postage costs I see as a reasonable premium to pay for not having to put together an order from (likely) several suppliers (to whom postage and handling fees would have to be paid anyway); therefore, I am interested in four sets of as many components as the group buy can include.

Regards.

Aengus

ex007 · 24th May 2007, 08:47 PM

I have updated the component list and I'v included as many components as possible. I'm going to do my math tomorow and try to update the GB with a price. After that we need to decide if we whant to go furtehr with this of not.

EvilYoda · 24th May 2007, 09:03 PM

Looks like you're including most of the parts, so definitely count me in, pending a final price. Thanks for all the work!

claiborne · 24th May 2007, 10:00 PM

Count me in for 2 sets as well. Thanks a bunch for taking the time to put this together!

ex007 · 26th May 2007, 09:50 PM

Now I'v done the math and the final price are 170 sek for one set, not including shiping and paypal fees.

Check out the shiping costs for this at peranders wiki page for the PCB group buy for shiping fee. I'll update the Wikipage during tomorow.

I'v investigated the possibility to include the relays but in this small volumes the price don't differ that much and they would increse the shiping cost.
The Wago connectors are not available for me at my local stores so I excluded them.

Aengus · 27th May 2007, 03:31 AM

Good news. Let us know when the Wiki is ready for expressions of commitment.

Regards.

Aengus

claiborne · 27th May 2007, 03:49 AM

Sorry ex007, I forgot I was already in the wiki from the first day, I have edited the wiki and taken the second occurance of my name off. Sorry.

If you are able to include the relays I would be interested even if it increases the shipping costs.

Does anyone know of a good place for people in the United States to get the WAGO connectors of the Heatsinks?

ex007 will you send out PAYPAL bills when you are ready to start taking money?

Thanks!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PA03 Or Pavel Dudek gainclone	MadFinn	Chip Amps	5	14th April 2011 01:37 AM
Pavel Dudek's super Gainclone group buy	peranders	Group Buys	322	25th July 2010 07:07 AM
WTB: PA-03 PCB - Pavel Dudek's 4780 Amp	dviswa	Swap Meet	0	2nd October 2008 03:31 AM
Pavel Dudek's PA03 -Where?	Stoff	Chip Amps	0	1st November 2007 08:07 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th May 2007, 05:38 PM	#21
EvilYoda diyAudio Member Join Date: Feb 2004 Location: Michigan	Apparently I never wrote on the wiki, odd...so make that 39 sets total.

19th May 2007, 01:22 PM	#23
ex007 diyAudio Member Join Date: Apr 2006 Location: Stockholm	I'v added a lot of components for the group buy with prices for indvdual category, all prices are calculated for 40 sets, and I should be able to cover all preliminary sets until now. See group buy wiki I'v been looking at diferent relays and they are quit expensive sins I'm not exactly sure of the footings I'v not listed them in the group buy. For two relays of 12V 16 A the price would becom 47 SEK.

19th May 2007, 07:12 PM	#24
Aengus diyAudio Member Join Date: Apr 2004 Location: Victoria, BC	Any additional postage costs I see as a reasonable premium to pay for not having to put together an order from (likely) several suppliers (to whom postage and handling fees would have to be paid anyway); therefore, I am interested in four sets of as many components as the group buy can include. Regards. Aengus

24th May 2007, 08:47 PM	#25
ex007 diyAudio Member Join Date: Apr 2006 Location: Stockholm	I have updated the component list and I'v included as many components as possible. I'm going to do my math tomorow and try to update the GB with a price. After that we need to decide if we whant to go furtehr with this of not.

24th May 2007, 09:03 PM	#26
EvilYoda diyAudio Member Join Date: Feb 2004 Location: Michigan	Looks like you're including most of the parts, so definitely count me in, pending a final price. Thanks for all the work!

24th May 2007, 10:00 PM	#27
claiborne diyAudio Member Join Date: Feb 2007 Location: Gulf Breeze, Florida	Count me in for 2 sets as well. Thanks a bunch for taking the time to put this together!

26th May 2007, 09:50 PM	#28
ex007 diyAudio Member Join Date: Apr 2006 Location: Stockholm	Now I'v done the math and the final price are 170 sek for one set, not including shiping and paypal fees. Check out the shiping costs for this at peranders wiki page for the PCB group buy for shiping fee. I'll update the Wikipage during tomorow. I'v investigated the possibility to include the relays but in this small volumes the price don't differ that much and they would increse the shiping cost. The Wago connectors are not available for me at my local stores so I excluded them.

27th May 2007, 03:31 AM	#29
Aengus diyAudio Member Join Date: Apr 2004 Location: Victoria, BC	Good news. Let us know when the Wiki is ready for expressions of commitment. Regards. Aengus

27th May 2007, 03:49 AM	#30
claiborne diyAudio Member Join Date: Feb 2007 Location: Gulf Breeze, Florida	Sorry ex007, I forgot I was already in the wiki from the first day, I have edited the wiki and taken the second occurance of my name off. Sorry. If you are able to include the relays I would be interested even if it increases the shipping costs. Does anyone know of a good place for people in the United States to get the WAGO connectors of the Heatsinks? ex007 will you send out PAYPAL bills when you are ready to start taking money? Thanks!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)