DIY TV tuner

DragonMaster · 7th November 2004, 05:32 PM

Could someone design a DIY TV tuner? I want to listen to TV on PC monitor and only have a composite & s-video to VGA box. I'm doing electronics as an hobby and don't know how to design something.

Alps build some TV tuners, but I don't know what to do of the 4/5 pins other than ground, 5v, video out and audio out(Some have others than V and Aud out). I also wonder how they output stereo sound out of these things.

http://www3.alps.co.jp/cgi-bin/WebOb...2003&product=2
They also build some FM tuners with L-chan and R-chan audio outputs.

DragonMaster · 20th January 2005, 08:14 PM

Actually, to get out stereo(dbx), I found NTE1800 IC

http://www.nteinc.com/specs/1800to1899/pdf/nte1800.pdf

and there's a "dbx noise reduction" IC to go with this, which is the NTE1801.

ancorp · 20th January 2005, 08:28 PM

How about just using a VCR as a tuner, and plugging the composite out on it into your vga box? You can probably get a VCR with a broken tape mechanism on trash day or at the dump

DragonMaster · 21st January 2005, 03:18 PM

The only VCRs I know are either mono or shutting down because of a fault somewhere.

(Stupid self-diagnistics . . .)

ancorp · 21st January 2005, 08:02 PM

I remember seeing several Stereo Toshibas on ebay, in scarbrough, ontario, fully functioning, with remote, and a buy it now for $25

Tekko · 21st January 2005, 09:01 PM

I would want a tv tuner too but small enough to fit in the space left in the box i built for my sharp tft.

ancorp · 21st January 2005, 10:38 PM

How about this? Its small, has a remote, and can be powered by 12 volts, so you can have one big powersupply for both a panel and fans and tuner. The price is right.

Here

DragonMaster · 21st January 2005, 11:33 PM

This box might be one of the crappy-unknown-china-company-thing-with-loose-plastic-and-tons-of-unuseful-features-with-a-poor-result
things you can get.

Tekko · 22nd January 2005, 10:17 AM

It´s also too big to fit in my screen case.

Lentroo · 22nd January 2005, 12:21 PM

Just buy a tv-card for you computer. Most om them (make sure before you buy) also have s-video and composite in, so you can connect game consoles and vcrs to you computer and then send the image to the projector

7th November 2004, 05:32 PM	#1
DragonMaster diyAudio Member Join Date: Dec 2003 Location: Montreal	DIY TV tuner Could someone design a DIY TV tuner? I want to listen to TV on PC monitor and only have a composite & s-video to VGA box. I'm doing electronics as an hobby and don't know how to design something. Alps build some TV tuners, but I don't know what to do of the 4/5 pins other than ground, 5v, video out and audio out(Some have others than V and Aud out). I also wonder how they output stereo sound out of these things. http://www3.alps.co.jp/cgi-bin/WebOb...2003&product=2 They also build some FM tuners with L-chan and R-chan audio outputs. __________________ Antoine http://dmsaudio.ca/

20th January 2005, 08:14 PM	#2
DragonMaster diyAudio Member Join Date: Dec 2003 Location: Montreal	Actually, to get out stereo(dbx), I found NTE1800 IC http://www.nteinc.com/specs/1800to1899/pdf/nte1800.pdf and there's a "dbx noise reduction" IC to go with this, which is the NTE1801. __________________ Antoine http://dmsaudio.ca/

21st January 2005, 03:18 PM	#4
DragonMaster diyAudio Member Join Date: Dec 2003 Location: Montreal	The only VCRs I know are either mono or shutting down because of a fault somewhere. (Stupid self-diagnistics . . .) __________________ Antoine http://dmsaudio.ca/

21st January 2005, 11:33 PM	#8
DragonMaster diyAudio Member Join Date: Dec 2003 Location: Montreal	This box might be one of the crappy-unknown-china-company-thing-with-loose-plastic-and-tons-of-unuseful-features-with-a-poor-result things you can get. __________________ Antoine http://dmsaudio.ca/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Larsholt fm tuner front end for JLH tuner design-Any still available?	djsb	Analogue Source	0	25th December 2008 04:46 PM
DIY your FM Tuner	3moons	Analogue Source	0	23rd November 2003 11:09 AM
For tuner..	Sch3mat1c	Analogue Source	11	14th February 2003 06:45 AM
diy pcb, tv tuner ?	gabdab	Parts	0	3rd January 2003 03:48 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

20th January 2005, 08:28 PM	#3
ancorp diyAudio Member Join Date: Jun 2004 Location: Vaughan, Ontario (near Toronto)	How about just using a VCR as a tuner, and plugging the composite out on it into your vga box? You can probably get a VCR with a broken tape mechanism on trash day or at the dump

21st January 2005, 08:02 PM	#5
ancorp diyAudio Member Join Date: Jun 2004 Location: Vaughan, Ontario (near Toronto)	I remember seeing several Stereo Toshibas on ebay, in scarbrough, ontario, fully functioning, with remote, and a buy it now for $25

21st January 2005, 09:01 PM	#6
Tekko diyAudio Member Join Date: Jan 2005 Location: SWE	I would want a tv tuner too but small enough to fit in the space left in the box i built for my sharp tft.

21st January 2005, 10:38 PM	#7
ancorp diyAudio Member Join Date: Jun 2004 Location: Vaughan, Ontario (near Toronto)	How about this? Its small, has a remote, and can be powered by 12 volts, so you can have one big powersupply for both a panel and fans and tuner. The price is right. Here

22nd January 2005, 10:17 AM	#9
Tekko diyAudio Member Join Date: Jan 2005 Location: SWE	It´s also too big to fit in my screen case.

22nd January 2005, 12:21 PM	#10
Lentroo diyAudio Member Join Date: Nov 2004 Location: Skövde, Sweden	Just buy a tv-card for you computer. Most om them (make sure before you buy) also have s-video and composite in, so you can connect game consoles and vcrs to you computer and then send the image to the projector

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read