|
|
#961 |
|
diyAudio Member
Join Date: Jun 2003
Location: Surrey/Hampshire borders
|
The (almost) starting point - 18mm Baltic Birch cut to size, rebate/hole for bass unit cut, hole for the Waveguide cut and rebated (my hand slipped a little - next time I do anything like that I will make a jig/template to keep the router inside the area). My method of construction always uses battens - just visible in the tops (on the floor!)
|
|
|
|
#962 |
|
diyAudio Member
Join Date: Jun 2003
Location: Surrey/Hampshire borders
|
I was quite proud of the fit - the bits are just pushed together - no nails/screws elastic bands - quite pleasing.
A couple of shots of the fibre-glass waveguides - plus grasses. |
|
|
|
#963 |
|
diyAudio Member
Join Date: Jun 2003
Location: Surrey/Hampshire borders
|
this time?
|
|
|
|
#964 |
|
diyAudio Member
Join Date: Jun 2003
Location: Surrey/Hampshire borders
|
plus grasses
|
|
|
|
#965 |
|
diyAudio Member
Join Date: Jun 2003
Location: Surrey/Hampshire borders
|
other way up
|
|
|
|
#966 |
|
diyAudio Member
Join Date: Jun 2003
Location: Surrey/Hampshire borders
|
even if I do say so myself
|
|
|
|
#967 |
|
diyAudio Member
Join Date: Jun 2003
Location: Surrey/Hampshire borders
|
so it is cases after a few sprays
|
|
|
|
#968 |
|
diyAudio Member
Join Date: Jun 2003
Location: Surrey/Hampshire borders
|
it will soon be over!
|
|
|
|
#969 |
|
diyAudio Member
Join Date: Jun 2003
Location: Surrey/Hampshire borders
|
the first cross-over - could not wait for all my resistors - I wanted to listen. I will post photos of the finished units when I can reduce their size.
|
|
|
|
#970 |
|
diyAudio Member
Join Date: Jan 2004
Location: Texas
|
Very nice work. I like the plywood better than the MDF.
|
|
| Thread Tools | Search this Thread |
|
|
| New To Site? | Need Help? |