Home · Search · Register  

Home » Member » goddlediddles » 16A8 single-ended triodes Photo Options

  Slide Show   Next image

HT smoothing choke construction.
Click on image to view larger image

  Slide Show   Next image

PSU3.jpg
PSU4.jpg
Amp1.jpg
more

Photo Details
goddlediddles


diyAudio Member

Registered: November 2010
Location: Ballybunion
Posts: 2
users gallery
The choke is made from a microwave oven tranny. The HT winding gives an inductance of approx 100 Henrys with an air gap of .01 inches inserted by cutting the "E" and "I" laminations apart with a thin cutting disk. The laminations are glued back with epoxy and the gap width maintained with small lengths of copper wire while glue is curing.
Date: Sun November 21, 2010 Views: 10902
Filesize: 35.6kb, 288.6kb Dimensions: 1200 x 803
Additional Info
Quick Rate: Poor Excellent
Keywords: HT smoothing choke construction.
Linked Thumbnail:
Linked Medium:
Medium Image:


Photo Sharing Gallery by PhotoPost
Copyright © 2009 All Enthusiast, Inc.


All times are GMT. The time now is 04:47 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd. ()
Copyright 1999-2014 diyAudio