Home · Search · Register  

Home » Member » vdi_nenna » My Turntable Photo Options

Previous image   Slide Show   Next image

Tonearm_2
Counterweight and Fine Tuning
Click on image to view smaller image

Previous image   Slide Show   Next image

more
Table_1.jpg
Table_0.jpg
Tonearm_2.jpg
Tonearm_1.jpg
Tonearm_0.jpg
more

Photo Details
vdi_nenna


diyAudio Member

Registered: October 2000
Location: PA, USA
Posts: 2,374
users gallery
Shown is a hardened steel base, bronze adjustment base, counterweight and fine tuning screw.
Arm/wand is a #13 crochet needle $6. The pin for the pivot point is a crochet needle with a hook, cut down to three sizes $1.99.
Both bases were free, but would not cost more than $30 for both. Counterweight cost $3.98 at Home Depot. It's a plumb line weight cut down to 118 grams. The fine adjustment screw on the end is a M8 hex bolt. The end of the wand is taped. It can accept .75". 1" and 1.5". Might even accept 2" or larger. Threading reaches pivot point.
Everything needs to be cleaned up.
Date: Mon February 18, 2013 Views: 2696
Filesize: 32.3kb, 119.1kb Dimensions: 640 x 478
Additional Info
Quick Rate: Poor Excellent
Keywords: Counterweight Fine Tuning
Linked Thumbnail:
Linked Image:


Photo Sharing Gallery by PhotoPost
Copyright © 2009 All Enthusiast, Inc.


All times are GMT. The time now is 10:30 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd. ()
Copyright 1999-2014 diyAudio