Home » Member » vdi_nenna » My Turntable

Previous image   Next image

Counterweight and Fine Tuning
Click on image to view larger image

Previous image   Next image


Photo Details
vdi_nenna


diyAudio Member

Registered: October 2000
Location: PA, USA
Posts: 3,319
users gallery
Shown is a hardened steel base, bronze adjustment base, counterweight and fine tuning screw.
Arm/wand is a #13 crochet needle $6. The pin for the pivot point is a crochet needle with a hook, cut down to three sizes $1.99.
Both bases were free, but would not cost more than $30 for both. Counterweight cost $3.98 at Home Depot. It's a plumb line weight cut down to 118 grams. The fine adjustment screw on the end is a M8 hex bolt. The end of the wand is taped. It can accept .75". 1" and 1.5". Might even accept 2" or larger. Threading reaches pivot point.
Everything needs to be cleaned up.
Date: Mon February 18, 2013

Additional Info
Direct link:

 


Copyright ©1999-2017 diyAudio