Home » Member » dvb projekt » "Reference" TDA1541A DAC project with I2S-BUS architecture

Previous image   Next image

Top panel of the PSU case
Click on image to view larger image

Previous image   Next image


Photo Details
dvb projekt


diyAudio Member

Registered: February 2009
Location: Willich, Germany
Posts: 1,481
users gallery
My Reference TDA1541A DAC project comes to the final stage, the housing.
After my decision to make a tube rectifier circuit for the B+ of the Tube-I-zator output stage,
i will make a two case design with a separate case for the PSU.

Into the PSU case i will insert the two +/- Power Supply Modules and the Tube rectifier circuit.
The transformer goes on the top of the case in a separate aluminum housing. Also the tube rectifier goes on top.
Because i will use only MKP Mundorf caps in the rectifier circuit, the 47µF and the two 100µF caps goes through the top panel.
Date: Mon January 31, 2011

Additional Info
Additional Categories: Digital
Direct link:

 


Copyright ©1999-2017 diyAudio