Home · Search · Register  

Home » Member » dvb projekt » "Reference" TDA1541A DAC project with I2S-BUS architecture Photo Options

Previous image   Slide Show   Next image

screen-capture-1
Top panel of the PSU case
Click on image to view smaller image

Previous image   Slide Show   Next image

more
SAM_0284.JPG
SAM_0321.JPG
screen-capture-1.png
screen-capture-2.png
screen-capture-3.png
more

Photo Details
dvb projekt


diyAudio Member

Registered: February 2009
Location: Willich, Germany
Posts: 1,344
users gallery
My Reference TDA1541A DAC project comes to the final stage, the housing.
After my decision to make a tube rectifier circuit for the B+ of the Tube-I-zator output stage,
i will make a two case design with a separate case for the PSU.

Into the PSU case i will insert the two +/- Power Supply Modules and the Tube rectifier circuit.
The transformer goes on the top of the case in a separate aluminum housing. Also the tube rectifier goes on top.
Because i will use only MKP Mundorf caps in the rectifier circuit, the 47F and the two 100F caps goes through the top panel.
Date: Mon January 31, 2011 Views: 11223
Filesize: 96.5kb, 25.9kb Dimensions: 723 x 955
Additional Info
Quick Rate: Poor Excellent
Keywords: Top panel of PSU case
Additional Categories: Digital
Linked Thumbnail:
Linked Image:


Photo Sharing Gallery by PhotoPost
Copyright © 2009 All Enthusiast, Inc.


All times are GMT. The time now is 03:18 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd. ()
Copyright 1999-2014 diyAudio