Registered: February 2009
Location: Willich, Germany
My Reference TDA1541A DAC project comes to the final stage, the housing.
After my decision to make a tube rectifier circuit for the B+ of the Tube-I-zator output stage,
i will make a two case design with a separate case for the PSU.
Into the PSU case i will insert the two +/- Power Supply Modules and the Tube rectifier circuit.
The transformer goes on the top of the case in a separate aluminum housing. Also the tube rectifier goes on top.
Because i will use only MKP Mundorf caps in the rectifier circuit, the 47µF and the two 100µF caps goes through the top panel.
| · Date: Sun January 30, 2011 · Views: 9735
· Filesize: 96.5kb, 25.9kb · Dimensions: 723 x 955 ·
|Keywords: Top panel of PSU case|
|Additional Categories: Digital|