Home » Member » dvb projekt » Teralink X2 modificationīs

  Next image

Teralink X2 internal view
Click on image to view larger image

  Next image


Photo Details
dvb projekt


diyAudio Member

Registered: February 2009
Location: Willich, Germany
Posts: 1,481
users gallery
This is the internal view of the Teralink X2 before my modifications.
It has two voltage lines.
A +5V line for the TCXO and all ICīs expect the Tenor chip, witch get itīs separate 3.3V from the small voltage regulator (+5V to +3.3V) in the lower right corner.

You could power the X2 with the USB +5V power or with a separate wall wart supply.
For the latter, there is a LT1084 voltage reg. onboard,witch is buffered by three 180ĩF Sanyo OS-Con SP caps.
Date: Fri December 24, 2010

Additional Info
Additional Categories: Digital
Direct link:

 


Copyright Đ1999-2017 diyAudio