Registered: February 2009
Location: Willich, Germany
This is the internal view of the Teralink X2 before my modifications.
It has two voltage lines.
A +5V line for the TCXO and all ICīs expect the Tenor chip, witch get itīs separate 3.3V from the small voltage regulator (+5V to +3.3V) in the lower right corner.
You could power the X2 with the USB +5V power or with a separate wall wart supply.
For the latter, there is a LT1084 voltage reg. onboard,witch is buffered by three 180ĩF Sanyo OS-Con SP caps.
| · Date: Fri December 24, 2010 · Views: 17304
· Filesize: 46.0kb, 650.9kb · Dimensions: 1600 x 1200 ·
|Keywords: Teralink X2 internal view|
|Additional Categories: Digital|