Home · Search · Register  

Home » Member » goddlediddles » 16A8 single-ended triodes Photo Options

  Slide Show   Next image

HT smoothing choke construction.
Click on image to view smaller image

  Slide Show   Next image


Photo Details

diyAudio Member

Registered: November 2010
Location: Ballybunion
Posts: 2
users gallery
The choke is made from a microwave oven tranny. The HT winding gives an inductance of approx 100 Henrys with an air gap of .01 inches inserted by cutting the "E" and "I" laminations apart with a thin cutting disk. The laminations are glued back with epoxy and the gap width maintained with small lengths of copper wire while glue is curing.
Date: Sun November 21, 2010 Views: 12754
Filesize: 35.6kb, 288.6kb Dimensions: 1200 x 803
Additional Info
Quick Rate: Poor Excellent
Keywords: HT smoothing choke construction.
Linked Thumbnail:
Linked Image:

Photo Sharing Gallery by PhotoPost
Copyright © 2009 All Enthusiast, Inc.

All times are GMT. The time now is 11:56 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd. ()
Copyright 1999-2015 diyAudio