Home » Member » 5th element » Loudspeaker measurements.

Previous image   Next image

systdis
Click on image to view larger image

Previous image   Next image


Photo Details
5th element


diyAudio Member

Registered: October 2002
Location: England
Posts: 5,267
users gallery
Distortion plot from 500-20khz showing the system distortion at a high drive level. This is way beyond what I would ever listen to. Interestingly the tweeter drive level was around 25-35 volts p-p, the increase in power required to combat some upper end droop, this does explain the increase in distortion towards high frequencies too.

This should be about ~100dB @ 1 meter.

There are also some peaks due to things in the room rattling Such as the one you can just see off at around 500hz. The midrange driver used is a SEAS W15CY001 crossed in at 2000hz 4th order.
Date: Fri September 10, 2010

Additional Info
Direct link:

 


Copyright ©1999-2017 diyAudio