Home Forums Rules Articles diyAudio Store Gallery Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

  Home · Search · Register  

Home » Main » Other DIY Photo Options

Previous image   Slide Show   Next image

Latest project
Click on image to view larger image

Previous image   Slide Show   Next image


Photo Details

diyAudio Member

Registered: July 2008
Location: Wisconsin
Posts: 11
users gallery
I was bored with the same-o round ports, so I calculated the surface area of a 4" round port- of which 3 were required for this 10 cubic foot enclosure. The measurements I came up with were approximately 5-1/2" per side for the triangle, and 3-1/2" per side for the square. I put a 1/2" radius on the inside of the bezel openings and I'll let you be the judge for the results. There is no wind noise from the ports and I am a happy camper! I used a Dayton DCS450 18" driver and a Dayton SA240 subwoofer amplifier. The results are as you would imagine.
Date: Wed December 30, 2009 Views: 25355
Filesize: 28.5kb, 285.2kb Dimensions: 2500 x 1875
Additional Info
Rating: ********* 9.00
Quick Rate: Poor Excellent
Keywords: Latest project
Additional Categories: Member Galleries
Linked Thumbnail:
Linked Medium:
Medium Image:

Photo Sharing Gallery by PhotoPost
Copyright © 2009 All Enthusiast, Inc.

All times are GMT. The time now is 08:32 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd. ()
Copyright 1999-2017 diyAudio