diyAudio http://www.diyaudio.com/forums/gallery Fri, 22 Aug 2014 22:44:49 -0400 PhotoPost Pro 6.02 1/2 of YARPS http://www.diyaudio.com/forums/gallery/showphoto.php/photo/6513 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/6513" target="_blank"><img title="DSC_7234.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/DSC_7234.jpg" alt="DSC_7234.jpg" /></a><br /><br />by: wintermute<br /><br />Description: Well I have finally got around to prototyping the YARPS powersupply, well 1/2 anyway.. I don't have enough jumpers in my new breadboard kit to do a full implementation so just did 1/2 (I haven't got the transformer yet either and only had a single 15V secondary as well) Thought I'd take a photo before powering it up just in case it smokes! Tested up to the reg section and the CRCRC is working well. only approx 2mV ripple before the reg with around 300mA of current drawn. Stupidly I put the -ve on the wrong side for doing the full implementation on the breadboard should I get some more jumpers :roll: wintermute Fri, 22 Apr 2011 06:27:59 -0400 1/2 of YARPS http://www.diyaudio.com/forums/gallery/showphoto.php/photo/6514 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/6514" target="_blank"><img title="DSC_7234.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/DSC_7234.jpg" alt="DSC_7234.jpg" /></a><br /><br />by: wintermute<br /><br />Description: Well I have finally got around to prototyping the YARPS powersupply, well 1/2 anyway.. I don't have enough jumpers in my new breadboard kit to do a full implementation so just did 1/2 (I haven't got the transformer yet either and only had a single 15V secondary as well) Thought I'd take a photo before powering it up just in case it smokes! Tested up to the reg section and the CRCRC is working well. only approx 2mV ripple before the reg with around 300mA of current drawn. Stupidly I put the -ve on the wrong side for doing the full implementation on the breadboard should I get some more jumpers :roll: wintermute Fri, 22 Apr 2011 06:27:59 -0400 ready for triamping if desired. http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5336 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5336" target="_blank"><img title="DSC_5581.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/DSC_5581.jpg" alt="DSC_5581.jpg" /></a><br /><br />by: wintermute<br /><br />Description: more photo's of the MTM's which are now almost finished. I need to take one of the boxes with the front baffles sprayed, and also one with the dodgy grills attached (hopefully to be replaced with a better MK II design before too long. wintermute Thu, 17 Jun 2010 08:24:11 -0400 These legs are pointy! http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5334 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5334" target="_blank"><img title="DSC_5578.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/DSC_5578.jpg" alt="DSC_5578.jpg" /></a><br /><br />by: wintermute<br /><br />Description: more photo's of the MTM's which are now almost finished. I need to take one of the boxes with the front baffles sprayed, and also one with the dodgy grills attached (hopefully to be replaced with a better MK II design before too long. wintermute Thu, 17 Jun 2010 08:24:10 -0400 looking more complete. http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5335 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5335" target="_blank"><img title="DSC_5579.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/DSC_5579.jpg" alt="DSC_5579.jpg" /></a><br /><br />by: wintermute<br /><br />Description: more photo's of the MTM's which are now almost finished. I need to take one of the boxes with the front baffles sprayed, and also one with the dodgy grills attached (hopefully to be replaced with a better MK II design before too long.<br /><br />2 comments wintermute Thu, 17 Jun 2010 08:24:10 -0400 looking more complete. http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5461 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5461" target="_blank"><img title="DSC_5579.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/DSC_5579.jpg" alt="DSC_5579.jpg" /></a><br /><br />by: wintermute<br /><br />Description: more photo's of the MTM's which are now almost finished. I need to take one of the boxes with the front baffles sprayed, and also one with the dodgy grills attached (hopefully to be replaced with a better MK II design before too long. wintermute Thu, 17 Jun 2010 08:24:10 -0400 Got some parts :) http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5183 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5183" target="_blank"><img title="DSC_5594.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/DSC_5594.jpg" alt="DSC_5594.jpg" /></a><br /><br />by: wintermute<br /><br />Description: bits and pieces for three different projects. Big caps for my Series 200 Powersupply re-vamp. other caps resistors and regulators for Synergy crossover and YARPS powersupply. wintermute Mon, 12 Apr 2010 08:24:02 -0400 burnishing done! http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5161 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5161" target="_blank"><img title="DSC_5561.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/DSC_5561.jpg" alt="DSC_5561.jpg" /></a><br /><br />by: wintermute<br /><br />Description: This is a photo of my MTM's after applying organoil hard burnishing oil. I think they came up pretty well :) wintermute Fri, 02 Apr 2010 07:25:38 -0400 burnishing done! http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5162 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5162" target="_blank"><img title="DSC_5563.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/DSC_5563.jpg" alt="DSC_5563.jpg" /></a><br /><br />by: wintermute<br /><br />Description: This is a photo of my MTM's after applying organoil hard burnishing oil. I think they came up pretty well :) wintermute Fri, 02 Apr 2010 07:25:38 -0400 Making Progress http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4613 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4613" target="_blank"><img title="DSC_4944.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/DSC_4944.jpg" alt="DSC_4944.jpg" /></a><br /><br />by: wintermute<br /><br />Description: This is a picture after sanding the veneer. I did it with the random orbit at 240 and then 400 grit, and then finally with 1200. I think though I might need to go back to the 400 again for a bit and then do the 1200 (perhaps with 600 in between), but looking promising, especially since I haven't started burnishing yet! wintermute Tue, 08 Dec 2009 06:55:34 -0500 Applying Veneer http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4380 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4380" target="_blank"><img title="DSC_4929.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/DSC_4929.jpg" alt="DSC_4929.jpg" /></a><br /><br />by: wintermute<br /><br />Description: The final piece of veneer for this box being glued. wintermute Mon, 30 Nov 2009 22:41:13 -0500 Applying Veneer http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5467 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5467" target="_blank"><img title="DSC_4929.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/DSC_4929.jpg" alt="DSC_4929.jpg" /></a><br /><br />by: wintermute<br /><br />Description: The final piece of veneer for this box being glued. wintermute Mon, 30 Nov 2009 22:41:13 -0500 This is a picture of my current system. A lot of the stuff in the rack is http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4298 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4298" target="_blank"><img title="ce74a15c6d60f362e1887c8ac9bf9d67_291.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/ce74a15c6d60f362e1887c8ac9bf9d67_291.jpg" alt="ce74a15c6d60f362e1887c8ac9bf9d67_291.jpg" /></a><br /><br />by: wintermute wintermute Mon, 09 Nov 2009 06:36:22 -0500 After I re-drilled the holes for the binding posts I had to see what they l http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4297 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4297" target="_blank"><img title="29f487d05dabdad62114925775efedc7_290.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/29f487d05dabdad62114925775efedc7_290.jpg" alt="29f487d05dabdad62114925775efedc7_290.jpg" /></a><br /><br />by: wintermute wintermute Mon, 09 Nov 2009 06:19:40 -0500 This is my Walin II preamp (used as a mic preamp for speaker testing). The http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4133 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4133" target="_blank"><img title="a6ebdd0637009cc6a7dadab836239091_100.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/a6ebdd0637009cc6a7dadab836239091_100.jpg" alt="a6ebdd0637009cc6a7dadab836239091_100.jpg" /></a><br /><br />by: wintermute wintermute Sat, 19 Sep 2009 06:42:48 -0400 This is my Walin II preamp (used as a mic preamp for speaker testing). The http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5466 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5466" target="_blank"><img title="a6ebdd0637009cc6a7dadab836239091_100.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/a6ebdd0637009cc6a7dadab836239091_100.jpg" alt="a6ebdd0637009cc6a7dadab836239091_100.jpg" /></a><br /><br />by: wintermute wintermute Sat, 19 Sep 2009 06:42:48 -0400 Rear view of my gainclone, note the dodgy hole for the iec power socket. H http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4086 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4086" target="_blank"><img title="b723b1a415d743cd8983257627572730_53.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/b723b1a415d743cd8983257627572730_53.jpg" alt="b723b1a415d743cd8983257627572730_53.jpg" /></a><br /><br />by: wintermute wintermute Wed, 02 Sep 2009 07:34:29 -0400 front view of my gainclone. The chasis was made out of a Heatsink from a F http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4085 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4085" target="_blank"><img title="6c9bc43808f5c9a0dd63543f63f0b433_52.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/6c9bc43808f5c9a0dd63543f63f0b433_52.jpg" alt="6c9bc43808f5c9a0dd63543f63f0b433_52.jpg" /></a><br /><br />by: wintermute wintermute Wed, 02 Sep 2009 07:34:29 -0400 Guts of my p2p LM3886 gainclone. Despite everything being crammed in to suc http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4084 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4084" target="_blank"><img title="f6b6aceb870792176a79a00d982d6a2e_51.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/f6b6aceb870792176a79a00d982d6a2e_51.jpg" alt="f6b6aceb870792176a79a00d982d6a2e_51.jpg" /></a><br /><br />by: wintermute wintermute Wed, 02 Sep 2009 07:34:29 -0400 Guts of my p2p LM3886 gainclone. Despite everything being crammed in to suc http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5463 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5463" target="_blank"><img title="f6b6aceb870792176a79a00d982d6a2e_51.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/f6b6aceb870792176a79a00d982d6a2e_51.jpg" alt="f6b6aceb870792176a79a00d982d6a2e_51.jpg" /></a><br /><br />by: wintermute wintermute Wed, 02 Sep 2009 07:34:29 -0400 front view of my gainclone. The chasis was made out of a Heatsink from a F http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5464 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5464" target="_blank"><img title="6c9bc43808f5c9a0dd63543f63f0b433_52.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/6c9bc43808f5c9a0dd63543f63f0b433_52.jpg" alt="6c9bc43808f5c9a0dd63543f63f0b433_52.jpg" /></a><br /><br />by: wintermute wintermute Wed, 02 Sep 2009 07:34:29 -0400 Rear view of my gainclone, note the dodgy hole for the iec power socket. H http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5465 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5465" target="_blank"><img title="b723b1a415d743cd8983257627572730_53.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/b723b1a415d743cd8983257627572730_53.jpg" alt="b723b1a415d743cd8983257627572730_53.jpg" /></a><br /><br />by: wintermute wintermute Wed, 02 Sep 2009 07:34:29 -0400 My Playmaster series 200 integrated amp. 100W / channel into 8 ohms mosfet. http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4057 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4057" target="_blank"><img title="a8f57c95f16e29b4107549fef9306967_11.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/a8f57c95f16e29b4107549fef9306967_11.jpg" alt="a8f57c95f16e29b4107549fef9306967_11.jpg" /></a><br /><br />by: wintermute wintermute Sat, 29 Aug 2009 20:51:07 -0400 My Playmaster series 200 integrated amp. 100W / channel into 8 ohms mosfet. http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5462 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/5462" target="_blank"><img title="a8f57c95f16e29b4107549fef9306967_11.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/a8f57c95f16e29b4107549fef9306967_11.jpg" alt="a8f57c95f16e29b4107549fef9306967_11.jpg" /></a><br /><br />by: wintermute wintermute Sat, 29 Aug 2009 20:51:07 -0400 One of my morel MTM cabinets after flaring the woofer cutouts, and grinding http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4056 <a href="http://www.diyaudio.com/forums/gallery/showphoto.php/photo/4056" target="_blank"><img title="518d00591f982899e1dd979010eedc5b_10.jpg" border="0" src="http://origin.dastatic.com/forums/gallery/data/1423/thumbs/518d00591f982899e1dd979010eedc5b_10.jpg" alt="518d00591f982899e1dd979010eedc5b_10.jpg" /></a><br /><br />by: wintermute wintermute Sat, 29 Aug 2009 20:49:54 -0400