1/2 sheet of ply project?

Phergus_25 · 19th March 2007, 09:38 PM

Are there any enclosures that can be made of half of a sheet of Ply?
I have a 4X4 section and would like to make another set of speakers.
-greg

MJL21193 · 19th March 2007, 10:13 PM

A quick calculation in my head tells me you have enough plywood for two boxes that will be approximately 12" x 12" x 18". How's that?

Phergus_25 · 19th March 2007, 10:18 PM

Im tempted to try some kind of a sub enclosure project. But I dont lnow
thanks for the calculations, im going to start just playing around designing somehthing.

davidallancole · 20th March 2007, 09:41 PM

Do an H Baffle sub.

Cal Weldon · 20th March 2007, 10:53 PM

Half a sheet of ply?

Hmm...in my books, that's half a speaker.

Phergus_25 · 20th March 2007, 11:14 PM

haha yea I didnt think I was going to come up with much. But I though I would ask.
I built my Austins which took Basicaly EXACTLY a sheet and a half. So I'v got half a sheet sitting around.
-greg

19th March 2007, 09:38 PM	#1
Phergus_25 diyAudio Member Join Date: Nov 2006	1/2 sheet of ply project? Are there any enclosures that can be made of half of a sheet of Ply? I have a 4X4 section and would like to make another set of speakers. -greg

20th March 2007, 10:53 PM	#5
Cal Weldon Speakerholic diyAudio Moderator Join Date: Jan 2004 Location: British Columbia	Half a sheet of ply? Hmm...in my books, that's half a speaker. __________________ Next stop: Margaritaville Some of Cal's stuff \| Cal Weldon Consulting

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
looking for old data sheet	unclejed613	Parts	3	13th May 2007 06:35 PM
MT-200 silicon sheet	1_C_E_M_A_N	Group Buys	9	26th July 2005 06:44 AM
op amp/dac data sheet help	Smiffy	Parts	11	13th December 2004 08:14 PM
data sheet	KCC	Parts	5	6th January 2004 09:03 PM
KT81 data sheet?	EC8010	Tubes / Valves	11	21st April 2003 03:25 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th March 2007, 10:13 PM	#2
MJL21193 Account disabled at member's request Join Date: Mar 2007	A quick calculation in my head tells me you have enough plywood for two boxes that will be approximately 12" x 12" x 18". How's that?

19th March 2007, 10:18 PM	#3
Phergus_25 diyAudio Member Join Date: Nov 2006	Im tempted to try some kind of a sub enclosure project. But I dont lnow thanks for the calculations, im going to start just playing around designing somehthing.

20th March 2007, 09:41 PM	#4
davidallancole diyAudio Member Join Date: Nov 2005	Do an H Baffle sub.

20th March 2007, 11:14 PM	#6
Phergus_25 diyAudio Member Join Date: Nov 2006	haha yea I didnt think I was going to come up with much. But I though I would ask. I built my Austins which took Basicaly EXACTLY a sheet and a half. So I'v got half a sheet sitting around. -greg

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)