diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Full Range (http://www.diyaudio.com/forums/full-range/)
-   -   Neofone and Foster (http://www.diyaudio.com/forums/full-range/95606-neofone-foster.html)

_henry_ 3rd February 2007 03:06 PM

Neofone and Foster
 
I'm going to build Neofone and Foster from DIYhifiSupply

anyone have experience with this setup?

thanks for the help.

InclinedPlane 3rd February 2007 03:44 PM

Alright! Another fullrange supplier and product lineup I didn't know about. I wonder just how much is really out there..

_henry_ 3rd February 2007 04:05 PM

i think this one using CSS design, if i'm not mistaken, but the cone is different and neofone using neodymium magnet without the phase plug

_henry_ 3rd February 2007 04:12 PM

2 Attachment(s)
Is this driver possible for ML-TL?

Perhaps GM can help? ;)

planet10 5th February 2007 02:24 AM

I have a set of these drivers. The ribbon is very highly regarded -- haven't hooked them up yet.

The NeoPhone we did toss into an OB fresh out of the box. After less than a half-hour we put it aside until we could get some hours on them.

My intention is to morph the Thorsten box into a Fonken/miniOnken-style box.

dave

_henry_ 5th February 2007 08:11 AM

yes, i've seen the foster's in Legacy Focus 20/20, i think its highly regarded low cost ribbon :)

I'm thinking to build Floorstander, and adding the Dynafone as a woofer, should be passive or active?

it would be a great 3way Floorstanding, isn't it.

planet10 5th February 2007 09:31 AM

Quote:

Originally posted by _henry_
['m thinking to build Floorstander, and adding the Dynafone as a woofer, should be passive or active?

it would be a great 3way Floorstanding, isn't it.
That same thinking has crossed my mind too. Active on the bottom, passive on the top. So far the extent of XOs i've seeb have been series caps on the ribbons. I have a feeling that a series XO a bit lower might be interesting.

dave

_henry_ 5th February 2007 09:36 AM

maybe 2 per side using Push-push config like u recommend before?

OR maybe 2 8inch woofer per side, using Hi-Vi alu/mag cone or Jordan 6 inch?

is the volume going to be twice also (in push-push config)?

Landroval 5th February 2007 09:58 AM

Quote:

Originally posted by planet10
My intention is to morph the Thorsten box into a Fonken/miniOnken-style box.

dave

Hmmh, are you planning to use the (super)tweeter from the beginning, or try to run the neofone alone as fullrange?

planet10 5th February 2007 06:44 PM

Quote:

Originally posted by Landroval
Hmmh, are you planning to use the (super)tweeter from the beginning, or try to run the neofone alone as fullrange?
Yes.

dave


All times are GMT. The time now is 03:51 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2