Anyone measure Supravox 135LB?

Elias · 6th October 2006, 04:56 PM

Hello!

Have anyone ever mesured this driver, if you can share your graphs that would be great!

I'm interested in partucular the dispersion characteristics.

There are graphs on the manufacturer pages but I prefer independent results, just for comparison.

Thanks!

Elias · 11th October 2006, 02:49 PM

Anyone?!

It's hard to believe nobody have used this driver?

- Elias

peterbrorsson · 11th October 2006, 03:27 PM

Hi Elias!
I believe that it's the language barrier that rules here. If you post on some french or other european diy pages you will get answers for sure. I have searched some info about Supravox also but most hits have been with 215 models. Now I'm leaning towards these babies due to that Budapest is only 4 hours away with car.

Good luck/Peter

http://www.sonido.hu/eng/home.htm

el`Ol · 11th October 2006, 05:03 PM

eltipo at audiodiskussion.de has measurement graphs. No narrow peaks and holes but drifting around over 10dB.

Elias · 12th October 2006, 11:13 AM

Peter: Yes, certain drivers are geopolitically more dominant than others. However, Supravox _should_ be quality manufacturer, so I'm assuming it is also quite wide spread. Anyway what is that link about, I didn't find any Supravox?

el'Ol: Thanks for the tip! I'll try fishing there if I have any luck.

BTW, can anyone recommend any french DIY-forum, with a lot of 135LB measurement data, of course

Elias · 6th October 2012, 06:06 PM

6 years anniversary

Believe or not, until today I haven't found any measurements of Supravox 135LB driver !

(other than available from Supravox homepage)

Please, share some plots if you have any. Thanks !

- Elias

Elias · 13th October 2012, 11:13 AM

Looks like Supravox 135LB is not very popular driver since no one is using them ?

murphythecat8 · 14th October 2012, 07:46 PM

no, supravox seems to be not really popular, not sure why.
I will however get a pair of 215 rtf soon. when I get some cash. so I will report one day.

Scottmoose · 14th October 2012, 09:29 PM

Presumably because their distribution outside Europe is patchy, with the result that the larger markets (North America, Japan etc) aren't all that familiar with the brand (read 'haven't even heard of them').

Elias · 27th February 2013, 08:04 PM

Ha! Finally some progress for this thread lol

Looks like in Norway someone made speakers using Supravox 135LB.
Supravox 135LB--->Design ideer??? - Side 2

Here's the posted freq response in an enclosure:

Not that bad midrange response.

6th October 2006, 04:56 PM	#1
Elias diyAudio Member Join Date: May 2003 Location: Where you live	Anyone measure Supravox 135LB? Hello! Have anyone ever mesured this driver, if you can share your graphs that would be great! I'm interested in partucular the dispersion characteristics. There are graphs on the manufacturer pages but I prefer independent results, just for comparison. Thanks!

6th October 2012, 06:06 PM	#6
Elias diyAudio Member Join Date: May 2003 Location: Where you live	6 years anniversary Believe or not, until today I haven't found any measurements of Supravox 135LB driver ! (other than available from Supravox homepage) Please, share some plots if you have any. Thanks ! - Elias __________________ Home page If our hearing would be accurate, we would be hearing two loudspeakers.

13th October 2012, 11:13 AM	#7
Elias diyAudio Member Join Date: May 2003 Location: Where you live	Looks like Supravox 135LB is not very popular driver since no one is using them ? __________________ Home page If our hearing would be accurate, we would be hearing two loudspeakers.

27th February 2013, 08:04 PM	#10
Elias diyAudio Member Join Date: May 2003 Location: Where you live	Ha! Finally some progress for this thread lol Looks like in Norway someone made speakers using Supravox 135LB. Supravox 135LB--->Design ideer??? - Side 2 Here's the posted freq response in an enclosure: Not that bad midrange response. __________________ Home page If our hearing would be accurate, we would be hearing two loudspeakers.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

11th October 2006, 02:49 PM	#2
Elias diyAudio Member Join Date: May 2003 Location: Where you live	Anyone?! It's hard to believe nobody have used this driver? - Elias

11th October 2006, 03:27 PM	#3
peterbrorsson diyAudio Member Join Date: Jan 2006 Location: Cz Rep.	Hi Elias! I believe that it's the language barrier that rules here. If you post on some french or other european diy pages you will get answers for sure. I have searched some info about Supravox also but most hits have been with 215 models. Now I'm leaning towards these babies due to that Budapest is only 4 hours away with car. Good luck/Peter http://www.sonido.hu/eng/home.htm

11th October 2006, 05:03 PM	#4
el`Ol diyAudio Member Join Date: May 2005 Location: Bavarian Forest	eltipo at audiodiskussion.de has measurement graphs. No narrow peaks and holes but drifting around over 10dB.

12th October 2006, 11:13 AM	#5
Elias diyAudio Member Join Date: May 2003 Location: Where you live	Peter: Yes, certain drivers are geopolitically more dominant than others. However, Supravox _should_ be quality manufacturer, so I'm assuming it is also quite wide spread. Anyway what is that link about, I didn't find any Supravox? el'Ol: Thanks for the tip! I'll try fishing there if I have any luck. BTW, can anyone recommend any french DIY-forum, with a lot of 135LB measurement data, of course

14th October 2012, 07:46 PM	#8
murphythecat8 diyAudio Member Join Date: Mar 2011 Location: Somewhere in Quebec	no, supravox seems to be not really popular, not sure why. I will however get a pair of 215 rtf soon. when I get some cash. so I will report one day.

14th October 2012, 09:29 PM	#9
Scottmoose diyAudio Member Join Date: Mar 2005 Location: UK	Presumably because their distribution outside Europe is patchy, with the result that the larger markets (North America, Japan etc) aren't all that familiar with the brand (read 'haven't even heard of them').

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Supravox 400EXC	hum4god	Swap Meet	0	10th March 2009 05:56 PM
Supravox OB	tomitune	Vendor's Bazaar	0	3rd March 2007 01:17 AM
Supravox OB	InclinedPlane	Full Range	4	2nd March 2007 10:07 PM
supravox 285gmf jensen +supravox fronthorn	Jacobus	Multi-Way	3	16th August 2006 12:15 PM
Speaker Workshop - using "Measure -> Passive Components" to measure ESR ?	percy	Multi-Way	0	12th March 2006 09:18 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read