Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|3rd October 2006, 03:36 PM||#1|
Join Date: Jul 2004
And yet another CSS FR125S design
maybe some of you remember a discussion several months ago about using FR125S together with a passive radiator. I did some calculations and came up with a 0.5 cu.ft enclosure (identical with the reflex version).
Today a good friend and I finished the cabinets.
As you can see it is a round enclosure, outside 15" diameter and 7" deep. FR125S is mounted off-center on one side and a Dayton 8" PR (75 grams Mms) is mounted on the back side.
We came up with a preliminary notch: 1mH, 8.2uF and 4.7 ohms but didn't tame the 7000Hz peak.
About the sound: due to the wide front you have no baffle step problem. Midrange is good (even better with notch). Bass is deep and powerful (too powerful for small rooms or near wall placement).
It's better to burn out than to fade away.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|TM design with FR125S + ND16FA||Matthew P.||Multi-Way||1||28th January 2009 04:48 PM|
|The CSS-FR125S in 4.5 litre aperiodic (planet10 design)||Speedsmile||Full Range||32||9th August 2007 04:55 PM|
|Bravura - Active FR125S Design Plans||Vikash||Full Range||1||22nd May 2007 02:23 PM|
|Another FR125S design. Finally Completed!||Vikash||Full Range||14||4th January 2007 03:49 AM|
|New To Site?||Need Help?|