diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Full Range (http://www.diyaudio.com/forums/full-range/)
-   -   lowther repair? (http://www.diyaudio.com/forums/full-range/80657-lowther-repair.html)

Zen Mod 31st May 2006 11:51 PM

lowther repair?
 
pair of PM4C

problems:

broken spider on one (looks repairable with some fine and steady neoprene glue jobie)

dead coils ; in fact-coils are good ,but drivers aren't used for long time,and connection between copper terminal wires (what is proper term for wire from terminal to cone?) and Alu coil is loose ;

any tips for Alu soldering ?

some particular solder ?

triode_al 27th June 2012 04:43 PM

Quote:

Originally Posted by Zen Mod (Post 929865)
pair of PM4C

problems:

broken spider on one (looks repairable with some fine and steady neoprene glue jobie)

dead coils ; in fact-coils are good ,but drivers aren't used for long time,and connection between copper terminal wires (what is proper term for wire from terminal to cone?) and Alu coil is loose ;

any tips for Alu soldering ?

some particular solder ?

There is alu solder, and I can share a few cm's, but comeon this question is ages old . . .

I just bought Lowthers but one needs a new surround. I try to find out how to do that :( as I do not want the cash layout for factory repair).
Suggestions?

yes Atelier Rullit would like to service them too and this looks like a good value/price compared to factory rejobbing.

Zen Mod 27th June 2012 04:53 PM

tnx for reply

that issue somehow isn't an issue anymore ;)

for Lowther refoam - just search on ebay.de for Lowther and you'll find myriad of recone kits

I believe with little patience you can do it by your self

triode_al 27th June 2012 08:00 PM

Quote:

Originally Posted by Zen Mod (Post 3074318)
tnx for reply

for Lowther refoam - just search on ebay.de for Lowther and you'll find myriad of recone kits

I believe with little patience you can do it by your self

A yes, the extension .DE is de secret ;)
I forget that the ebay sites are not linked together. Yes patience and some experience (e.g. I made Fostex 103 spider with wires ... )
albert

Zen Mod 27th June 2012 08:09 PM

whenever I'm searchin' something on bay , I'm using extended search , with Europe as search area

in that case , you can use your local bay , but hits are from all over


All times are GMT. The time now is 10:09 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2