Any Aura NS3 plans like the Cyburgs-Needles?

mazeroth · 19th May 2006, 01:24 AM

I read the whole Needles thread and saw a few guys were using the Aura NS3 in the Needles enclosure. I was wondering if anyone designed a cabinet specificallyl for the Aura NS3, or even, the Hi-Vi B3S? I would like to get away without using a notch and figured the Aura would be the way to go.

Thanks!

gmilitano · 19th May 2006, 01:34 AM

Hi,

Hi-Vi B3S single driver system
http://www.zaphaudio.com/audio-speaker18.html

Aura NS3-193 full range (3rd project down)
http://www.zaphaudio.com/archives.html

Best with a notch. Perhaps you can get away without one for nearfield listening.

Both projects are very well documented.

Have fun.
Gio.

mazeroth · 19th May 2006, 01:40 AM

Thanks for the links, but I'm looking for a "tower" design that's a transmission line as well, which will allow the speaker to dig much deeper. I'm still need to the transmission line thing and think I've read a few times a ported system is a TL. If that's the case, I don't want a port but want a TL with a "line" built out of wood channels.

Sorry for being so newbish on TLs

19th May 2006, 01:24 AM	#1
mazeroth diyAudio Member Join Date: Jul 2004 Location: Columbus, OH	Any Aura NS3 plans like the Cyburgs-Needles? I read the whole Needles thread and saw a few guys were using the Aura NS3 in the Needles enclosure. I was wondering if anyone designed a cabinet specificallyl for the Aura NS3, or even, the Hi-Vi B3S? I would like to get away without using a notch and figured the Aura would be the way to go. Thanks!

19th May 2006, 01:34 AM	#2
gmilitano diyAudio Member Join Date: Apr 2004 Location: Winnipeg, Manitoba	Hi, Hi-Vi B3S single driver system http://www.zaphaudio.com/audio-speaker18.html Aura NS3-193 full range (3rd project down) http://www.zaphaudio.com/archives.html Best with a notch. Perhaps you can get away without one for nearfield listening. Both projects are very well documented. Have fun. Gio. __________________ DIY Audio Projects [ 10" DIY Subwoofer \| FE127E Sealed Bipole \| [ LM3886 Chip Amp / Gainclone \| K-12M Tube Amp Kit ]

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My first DIY: Cyburgs Needles with HiVi B3S	chylld	Full Range	32	17th February 2009 07:57 PM
Cyburgs-Needle and Cyburgs-Pipe for FRS 8	Cyburgs	Multi-Way	20	2nd October 2007 08:24 PM
can i use needles?	ACQUA	Full Range	3	23rd October 2006 02:22 PM
tubes n needles	silurato	Tubes / Valves	6	22nd June 2005 05:03 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th May 2006, 01:40 AM	#3
mazeroth diyAudio Member Join Date: Jul 2004 Location: Columbus, OH	Thanks for the links, but I'm looking for a "tower" design that's a transmission line as well, which will allow the speaker to dig much deeper. I'm still need to the transmission line thing and think I've read a few times a ported system is a TL. If that's the case, I don't want a port but want a TL with a "line" built out of wood channels. Sorry for being so newbish on TLs