Production pics from DIY full range speaker project

Sclalars · 27th April 2006, 04:18 PM

Here`s my latest project!

SCD · 27th April 2006, 04:23 PM

Good for you, perhaps a little more detail?

Timn8ter · 27th April 2006, 04:42 PM

Amazing transparency.

Sclalars · 27th April 2006, 04:50 PM

I`ll try again!

Sclalars · 27th April 2006, 04:50 PM

more pics.

Sclalars · 27th April 2006, 04:50 PM

Sorry about that!
Thought I add some pictures first, and then tell about the project, but I am under moderation, so it goes very slow.
Ok, here`s some facts:
This project has been going for a while. Not a very easy project I have to say. A very complex construction with no square corners, and fine sand between the inner and outer panels. I am using Lowther DX3 in this project.
So far so good.
Is there a way where it`s possible to add more than one picture at the time?

Sclalars

Sclalars · 27th April 2006, 04:50 PM

More pics

Sclalars · 27th April 2006, 04:54 PM

more.

Sclalars · 27th April 2006, 04:59 PM

more.

Sclalars · 27th April 2006, 05:07 PM

more.

27th April 2006, 04:18 PM	#1
Sclalars diyAudio Member Join Date: Feb 2006 Location: Oslo, Norway	Production pics from DIY full range speaker project Here`s my latest project!

27th April 2006, 04:23 PM	#2
SCD diyAudio Member Join Date: Nov 2003 Location: 1/2 way up Vancouver Island	Good for you, perhaps a little more detail? __________________ SCD

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
full range pics-	tomtt	Full Range	910	12th January 2012 09:12 PM
Help with a full range project	Trower	Full Range	3	3rd July 2008 11:24 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th April 2006, 04:42 PM	#3
Timn8ter diyAudio Member Join Date: Jul 2003 Location: Seattle, WA	Amazing transparency.

27th April 2006, 04:50 PM	#6
Sclalars diyAudio Member Join Date: Feb 2006 Location: Oslo, Norway	Sorry about that! Thought I add some pictures first, and then tell about the project, but I am under moderation, so it goes very slow. Ok, here`s some facts: This project has been going for a while. Not a very easy project I have to say. A very complex construction with no square corners, and fine sand between the inner and outer panels. I am using Lowther DX3 in this project. So far so good. Is there a way where it`s possible to add more than one picture at the time? Sclalars

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)