Jim Griffin's JX92S designs

rob_deas · 21st February 2006, 11:27 PM

Does anyone know a working link to Jim's award winning Atlanta 2001 design? All the ones I've found by searching have been dead and lead to 404 error pages.

Jim Griffin · 21st February 2006, 11:46 PM

Rob,

Look at these links for the design package and 2004 Atlanta DIY speaker results.

Jim

Jordan JX92S with A-C Ribbon Design Package

2004 DIY Atlanta Results

Jim Griffin · 21st February 2006, 11:49 PM

Rob,

I should have added that the 2001 full range Jordan JX92S design has the same enclosure size as the 2004 winner but a 1.5 mH inductor and 4 ohms resistor (components in parallel with the network in series) for baffle step compensation. Of course no ribbon or crossover network for the older design.

Jim

ScottG · 22nd February 2006, 03:10 AM

Quote:

Originally posted by Jim Griffin
Rob,

Look at these links for the design package and 2004 Atlanta DIY speaker results.

Jim

Jordan JX92S with A-C Ribbon Design Package

2004 DIY Atlanta Results

You know, I suggested the design with the ribbon just the other day - but I don't think anything came of it.. Well at least the poor b@stard will never know what he's missing.

navin · 13th October 2006, 05:04 AM

Quote:

Originally posted by Jim Griffin
[B]Jordan JX92S with A-C Ribbon Design Package

this link is dead any other place with the full design?

Jim Griffin · 13th October 2006, 11:25 AM

Navin,

You can e-mail me for more info.

Thanks,

Jim

Ray Collins · 14th October 2006, 10:40 PM

Jim,
Have you given any more thought to designing a passive crossover for your new JX92 line array?

Ray

Jim Griffin · 15th October 2006, 01:21 AM

Quote:

Have you given any more thought to designing a passive crossover for your new JX92 line array?

Well Ray I don't have a new JX92S line array. Those Jordans would break the bank for most of us if you placed a dozen or so in an array.

You may be talking about my CSS WR125S and Aurum Cantus G2i-130 array that I demonstrated earlier this year at the Great Plains Audiofest. At that time the crossover was active but I do have a passive crossover version running at this point. I'm working with Bob Reimer of CSS for him to offer a kit with plans and parts with the passive crossover. CSS should be able to have the kit available in a few weeks, I hope. An delay is my fault in completion of the details.

Jim

Ray Collins · 15th October 2006, 01:31 AM

Jim,
My profound appology....I had a senior moment; I will pursue this later with you.
Please forgive the thread hijack....

Ray

jfk · 16th October 2006, 06:31 AM

Jim,
Could you email me regarding the crossover for the jx92/g2si tower that I listened to in dayton. I'd email you but the system currently prohibits my ability to do this.
Thanks much,
Jon (jfk)

21st February 2006, 11:27 PM	#1
rob_deas diyAudio Member Join Date: Jan 2004 Location: UK	Jim Griffin's JX92S designs Does anyone know a working link to Jim's award winning Atlanta 2001 design? All the ones I've found by searching have been dead and lead to 404 error pages.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ej Jordan JX92s and Aurum Cantus G2si with Griffin crossover	Chris74	Swap Meet	7	7th April 2009 10:19 PM
Jim Griffin's JX92S Plans	Whit	Full Range	14	20th March 2007 10:47 PM
Jim griffin's JX92s and AC design	Bern W	Multi-Way	1	2nd November 2005 07:51 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st February 2006, 11:46 PM	#2
Jim Griffin diyAudio Member Join Date: Jun 2003 Location: Tennessee	Rob, Look at these links for the design package and 2004 Atlanta DIY speaker results. Jim Jordan JX92S with A-C Ribbon Design Package 2004 DIY Atlanta Results

21st February 2006, 11:49 PM	#3
Jim Griffin diyAudio Member Join Date: Jun 2003 Location: Tennessee	Rob, I should have added that the 2001 full range Jordan JX92S design has the same enclosure size as the 2004 winner but a 1.5 mH inductor and 4 ohms resistor (components in parallel with the network in series) for baffle step compensation. Of course no ribbon or crossover network for the older design. Jim

13th October 2006, 11:25 AM	#6
Jim Griffin diyAudio Member Join Date: Jun 2003 Location: Tennessee	Navin, You can e-mail me for more info. Thanks, Jim

14th October 2006, 10:40 PM	#7
Ray Collins diyAudio Member Join Date: Jan 2006 Location: Mobile, Al.	Jim, Have you given any more thought to designing a passive crossover for your new JX92 line array? Ray

15th October 2006, 01:31 AM	#9
Ray Collins diyAudio Member Join Date: Jan 2006 Location: Mobile, Al.	Jim, My profound appology....I had a senior moment; I will pursue this later with you. Please forgive the thread hijack.... Ray

16th October 2006, 06:31 AM	#10
jfk diyAudio Member Join Date: Oct 2003 Location: ohio	Jim, Could you email me regarding the crossover for the jx92/g2si tower that I listened to in dayton. I'd email you but the system currently prohibits my ability to do this. Thanks much, Jon (jfk)