Will this work? Cyburgs-Needle+Sub+Tweeters

[Ruben19]

This will be my first project, and any advice is welcomed - the Cyburgs-Needle with Visaton FRS 8:

Cyburgs-Needle and Cyburgs-Pipe for FRS 8

The first question would be: is there an improvment if I add a tweeter to this design? If yes, any tweeters that you could recommend, from Visaton or Monacor? What cut-off frequency?

The two Needles will be the satellite speakers, and I will use a subwoofer:

http://www.visaton.com/english/artik..._543_6_23.html

The cut-off frequency of the sub will be adjustable, to a max of 110Hz.

Suggestions??
Thank you.

[Rudolf]

Originally posted by Ruben19
This will be my first project, and any advice is welcomed - the Cyburgs-Needle with Visaton FRS 8:
The first question would be: is there an improvment if I add a tweeter to this design? If yes, any tweeters that you could recommend, from Visaton or Monacor? What cut-off frequency?

The Visaton FRS 8 will not need a tweeter in the first place. But if you want a bit more clarity and less beaming in the highs then have a look at the Vox 80 and the Nano Sat by Visaton and their CP13 tweeter. Perhaps you could do something equivalent for the Needle.

[Rudolf]

http://www.visaton.de/vb/showthread....threadid=12013

Look in that link for posting #7 from the top. The diagrams will tell you all. Dimensions are under the x-over diagram.