diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Full Range (http://www.diyaudio.com/forums/full-range/)
-   -   1st Project & a ? (http://www.diyaudio.com/forums/full-range/67859-1st-project.html)

philipbarrett 14th November 2005 04:04 PM

1st Project & a ?
 
2 Attachment(s)
I've been lurking around this forum for some time & wanted to thank everyone whose advice and experience I used for this project.

Finished my first full range speakers, FE87Es in the Fostex recommended bass reflex enclosure. I chose these as a simple design with which to work on some woodworking skills & techniques. They will eventually be used for desktop monitors with my computer DAW system, at the moment they are being driven by my Darling SE.

Overall I'm very impressed. Lots of detail & depth, lively, excellent imaging and a very controlled mid-bass. I really like the high end, obviously the bass is somewhat lacking but that's not what I built them for anyway.

I am noticing a slight pronouncement at around 800Hz - 1KHz, makes vocals a little nasaly and I am wondering;

1) Is this typical?
2) Will it mitigate with some burn in time?
3) Can anyone lead me to a design for passive bandpass filters?

I plan to shoot them with my Spectra-Foo system when my case gets back from a show, however I've always believed my ears first.

Josephjcole 14th November 2005 04:11 PM

I don't have any first hand experience with the fe87e, but from using other fostex drivers, I would certainly give it some more time to break in. At least a couple of weeks of steady listening this should get you through the majority of the break in.
Joe

they look good by the way;)


All times are GMT. The time now is 08:29 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2