diyAudio (
-   Full Range (
-   -   NSB periscope TL (

MPM 13th October 2005 12:35 PM

NSB periscope TL
Featuring PVC and a cardboard baffle! I've played with these in the garage and they do pretty well considering the PVC pipe cost more than anything else. I haven't treated the cone yet. Speaker wire is a single cat5e soldered to the speaker and tinned on the connector side. Pipe stuffed with pillow internals about 1/2 down the line. At low volume they sound pretty good. The baffle definetly helped some. Planning to add some rocket fins and do a somewhat permanent hard board baffle.

All times are GMT. The time now is 09:32 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2