Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

looking for designs for the WR125
looking for designs for the WR125
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 14th July 2005, 09:49 PM   #1
zobsky is offline zobsky  India
diyAudio Member
zobsky's Avatar
Join Date: Mar 2002
Location: Dallas, Tx, USA
Default looking for designs for the WR125


the drivers should be in my possession next week. In the meantime, I'm pondering which cabinet design I should use (and possibly build this weekend).

I'm only ordering a pair of drivers so bipole designs are out of the question. These drivers will be used with a pair of top mounted linaeum tweeters on top (both around the same sensitivity, so not much padding required). Of course this arrangement will require the driver to be positioned very close to the top of the cabinet.

there are a couple of plans on this site that might work, notably the mini-onken but wanted opinions on TL type designs if possible.

Design objective is basically a speaker than is satisying to listen to by itself, though I have subwoofers standing by if needed, so I'm thinking useable 50Hz to 40Hz in room response

As mentioned, I would like to try a TL, if at all possible with this driver . From a post sometime ago by GM, we have various TL calculations http://www.diyaudio.com/forums/showt...120#post672120

design #2 MLTL might be workeable if I can fold the line to ensure the driver is right at the top

Any other suggestions on designs to try and also on what to objectively optimize if I feed the design into MJK workseets?

what are the subjective differences between an alpha TL and a MLTL and a regular TL?


"Not everything that can be counted counts, and not everything that counts can be counted." - Albert Einstein
  Reply With Quote


looking for designs for the WR125Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fr125 + Wr125 help Robertburchell Full Range 26 10th April 2008 08:59 PM
BIB's and WR125-16ohm mrpopgun Full Range 0 10th November 2006 06:57 PM
Wr125 Mtm dawaro Multi-Way 3 7th November 2006 10:31 PM
Wtb: Wr125 bjackson Swap Meet 0 8th November 2005 03:50 PM
WTB: Raven R1 and CSS WR125 dunderchief Swap Meet 0 28th December 2004 07:38 AM

New To Site? Need Help?

All times are GMT. The time now is 01:12 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio