Full range speaker and conrad-johnson - diyAudio
Go Back   Home > Forums > Loudspeakers > Full Range

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th January 2005, 04:20 AM   #1
diyAudio Member
 
Join Date: Nov 2004
Location: Berkeley
Default Full range speaker and conrad-johnson

Looking to do a full range BLH with the Fostex FE166ES-R Special Edition. The SPL is 95.5 dB/W/m. My set-up is a c-j PV10A and the sonographe SA-250(2x125). For speaker cable I have an 12 meter run of DIY plenum cat 5, 16 twisted pairs for a 12awg. The cat 5 is low inductance, low resistance, and high capitance. The 12 meter pair is necessary for the WAF. Will my current electronics and speaker cable be OK with the Fostex FE166ES-R Special Edition back loaded horn? Is the amp too many potential watts for the driver?Thanks
  Reply With Quote
Old 12th January 2005, 11:45 PM   #2
diyAudio Member
 
Join Date: Nov 2004
Location: Berkeley
BTT, opinions wanted. Thanks
  Reply With Quote
Old 13th January 2005, 12:08 AM   #3
Banned
 
Join Date: Feb 2004
Location: Portal 2012
Default Re: Full range speaker and conrad-johnson

Quote:
Originally posted by AllCaster
Is the amp too many potential watts for the driver?Thanks
Only if you punish the driver with amps power . You should be fine. Just be careful.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Conrad Johnson Premier 350 Tube_Dude Solid State 0 30th January 2009 06:49 PM
Conrad Johnson PV 7 problem Peppe Tubes / Valves 8 8th November 2006 08:37 AM
Conrad Johnson MV 45 schematic help 845 Tubes / Valves 1 21st December 2005 04:39 PM
Conrad-Johnson PV6 Preamp paulcurrie Tubes / Valves 3 17th April 2004 07:11 PM
conrad johnson help efoda Tubes / Valves 3 24th January 2002 03:23 AM


New To Site? Need Help?

All times are GMT. The time now is 12:59 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2