Cyburgs-Needle for Tangband W3-871S - Page 9

jemraid · 9th June 2005, 07:22 AM

Dear SQ Kid

I'll try again for the pic

SQ Kid · 9th June 2005, 09:01 PM

much, much appreciated. looks like the new saw has a nice new project to play with.....

jemraid · 12th June 2005, 10:06 PM

I have now done enough to my Needles to be able to listen to them and thought I would, after obtaining Berndt's kind approval put up a web page detailing my efforts so far.

The URL is;
http://www.jrbham.btinternet.co.uk/needle/index.html

Regards - Jem

JWFokker · 15th June 2005, 07:10 PM

So in the HiVi vs Aurasound graph, which is which?

SQ Kid · 19th June 2005, 02:46 AM

well, i've got my hivi version of these about 90% done. any idea on what kinda filter i need for this? how bout crossover? thanks, and hopefully i'll have some pics up someday....

morglo · 19th June 2005, 03:07 PM

Hi there!

I would like to know if I can use a slightly different coil value?
0,56 mH is available, but only as quite expensive band-coils (or whatever they are called in english.)

What I can get access to without spending a fortune are the following values:

0,5 mH and 0,6 mH standard air wound coils 1,4 mm diameter.

By the way, would it make a noticable difference if I spent more money on the band coils, or is it more than the tangband driver deserves?

Thror · 23rd June 2005, 01:53 AM

Hi, thanks for the nice constructionplans

They work very good, though lacking a bit to much in the bass to be used without a sub. Here's a picture of mine http://home.no.net/torsaa/cyburg/IMG_0055.jpg

Cyburgs · 8th July 2005, 12:02 AM

@Thror: Very nice woodwork! The veneered version looks like right out of the shop. Do you put a "foot board" on them afterwards or du you leave them open?

Nice greetings, Berndt

Thror · 10th July 2005, 12:55 AM

Hi!
I'm going to put on the foot(it's black) after I've laquered the veener

Haven't tried them yet with the filter, looking forward to it.

jemraid · 20th July 2005, 09:54 PM

Here are a couple of pics of the finished articles, though I say it myself I'm quite pleased with the result.

This pic is a full length one.

Regards - Jem

19th June 2005, 03:07 PM	#86
morglo diyAudio Member Join Date: Jun 2005 Location: Stockholm	different coil value. Hi there! I would like to know if I can use a slightly different coil value? 0,56 mH is available, but only as quite expensive band-coils (or whatever they are called in english.) What I can get access to without spending a fortune are the following values: 0,5 mH and 0,6 mH standard air wound coils 1,4 mm diameter. By the way, would it make a noticable difference if I spent more money on the band coils, or is it more than the tangband driver deserves?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cyburgs Needle kit	ebijma	Full Range	5	13th October 2007 11:53 AM
Cyburgs-Needle and Cyburgs-Pipe for FRS 8	Cyburgs	Multi-Way	20	2nd October 2007 09:24 PM
TB W3-871s : Cyburgs Needle or Lancetta	rho	Full Range	22	6th October 2005 07:06 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th June 2005, 09:01 PM	#82
SQ Kid diyAudio Member Join Date: Apr 2003 Location: MA	much, much appreciated. looks like the new saw has a nice new project to play with.....

12th June 2005, 10:06 PM	#83
jemraid diyAudio Member Join Date: Aug 2004 Location: NE Derbyshire	I have now done enough to my Needles to be able to listen to them and thought I would, after obtaining Berndt's kind approval put up a web page detailing my efforts so far. The URL is; http://www.jrbham.btinternet.co.uk/needle/index.html Regards - Jem

15th June 2005, 07:10 PM	#84
JWFokker diyAudio Member Join Date: Feb 2005 Location: Kingston, NY	So in the HiVi vs Aurasound graph, which is which?

19th June 2005, 02:46 AM	#85
SQ Kid diyAudio Member Join Date: Apr 2003 Location: MA	well, i've got my hivi version of these about 90% done. any idea on what kinda filter i need for this? how bout crossover? thanks, and hopefully i'll have some pics up someday....

23rd June 2005, 01:53 AM	#87
Thror diyAudio Member Join Date: Oct 2003 Location: Norway/Prague	Hi, thanks for the nice constructionplans They work very good, though lacking a bit to much in the bass to be used without a sub. Here's a picture of mine http://home.no.net/torsaa/cyburg/IMG_0055.jpg

8th July 2005, 12:02 AM	#88
Cyburgs diyAudio Member Join Date: Mar 2004 Location: Austria	@Thror: Very nice woodwork! The veneered version looks like right out of the shop. Do you put a "foot board" on them afterwards or du you leave them open? Nice greetings, Berndt

10th July 2005, 12:55 AM	#89
Thror diyAudio Member Join Date: Oct 2003 Location: Norway/Prague	Hi! I'm going to put on the foot(it's black) after I've laquered the veener Haven't tried them yet with the filter, looking forward to it.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)