diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Full Range (http://www.diyaudio.com/forums/full-range/)
-   -   lightweight for bass/edrum (http://www.diyaudio.com/forums/full-range/43160-lightweight-bass-edrum.html)

raintalk 22nd October 2004 03:17 AM

lightweight for bass/edrum
 
I'm looking to put together a portable cabinet for bass and e-drum use, similar to:

http://www.philjonesbass.com/PRODUCT...fcase_info.htm

It has to be lightweight around 20lbs and small, but of course able to handle down to 40Hz. I wouldn't put a port on the back because then it depends too much on placement.

Up to 6" drivers would be fine (as long as they're light)
150 - 200W RMS capacity or so.
Only for use in small restaurants type rooms.

Anybody have any suggestions for drivers?

Thanks in advance.


All times are GMT. The time now is 12:43 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2