first timer building bk-12m

[Burgle]

first time building speakers. Almost finished with one bk-12 speaker, but before i seal the other side, I'm wondering if I'm doing the stuffing right and if there's anything else i should do.

Also, should i add more stuffing, like it says in this image below? Original instructions don't say anything about this...

Thanks

 

[freddi]

it looks sensible per that drawing. If you have a few clamps laying around to temporarily hold the side in place , you could experiment with density and position a bit by "ear" before gluing that panel into place.

 

[pcgab]

I built some a year or so ago. I put a little bit of stuffing at the top of the transition, similar to the drawing.

I'll see if I can dig up a few pictures.

Cheers,
Gable

 

[pcgab]

Found a couple. I think I ended up adding a tiny bit more than is in these pictures. I didn't adjust it after construction.