Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Visaton WS 17 E (8 ohms)
Visaton WS 17 E (8 ohms)
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 17th November 2015, 12:16 PM   #1
Eldam is offline Eldam  France
Banned
 
Join Date: Sep 2012
Location: France
Default Visaton WS 17 E (8 ohms)

Hi,

Did someone already tested the cheap 20 euros Full Range Visaton WS 17 E in 8 ohms version ?

WS 17 E - 8 Ohm

http://docs-europe.electrocomponents...6b80115e87.pdf


Suitable for a horn with high horizontal expansion ? Highs too short ?
  Reply With Quote
Old 17th November 2015, 12:22 PM   #2
mondogenerator is offline mondogenerator  England
diyAudio Member
 
mondogenerator's Avatar
 
Join Date: Sep 2009
Location: City Of Villans
Eldam,

The driver is a midbass, and not a full range speaker.

High Q, which would make it more practical in OB or IB/sealed.

From the little I know high Q makes things more difficult in a horn.

If you type "Grande orgue, visaton" into Google,then you'll see a good application of the budget WS series woofers (I think the WS25 in this case)
__________________
Balancing the things I must do, with the things I'd like to do...This is a skill (or a luxury) amongst many that I do not possess.

Last edited by mondogenerator; 17th November 2015 at 12:25 PM.
  Reply With Quote
Old 17th November 2015, 03:57 PM   #3
Eldam is offline Eldam  France
Banned
 
Join Date: Sep 2012
Location: France
Ok, thank you. I had good hope it was able to play 100 to a 8000 Hz... at least in axis -seing the constructor curve...which are always too much optimist and dificult to read (scale) with Visaton !
  Reply With Quote
Old 17th November 2015, 04:20 PM   #4
mondogenerator is offline mondogenerator  England
diyAudio Member
 
mondogenerator's Avatar
 
Join Date: Sep 2009
Location: City Of Villans
It looks like it has an extended response I grant you, but I'm not sure 8k would sound nice - it looks like it measures fairly well to that point.

Have a look at the 8k polars for the W17E.

I wouldn't say the Visaton graphs are optimistic and certainly no more optimistic than any other manufacturer out there.

But the image may be small and difficult to read.

If you use Boxsim, then you can simulate a test box alignment, and see the response both on axis and off axis that the simulator calculates. This may help you to decide if the driver suits your intentions.
__________________
Balancing the things I must do, with the things I'd like to do...This is a skill (or a luxury) amongst many that I do not possess.

Last edited by mondogenerator; 17th November 2015 at 04:24 PM.
  Reply With Quote
Old 2nd December 2015, 06:53 AM   #5
coherenceaudio is offline coherenceaudio  India
Account disabled at member's request
 
Join Date: Aug 2015
i built visaton clou box with these. its 2.5way speaker. awesome bass for music. goes pretty deep and engaging. if i recall correctly, xover point is ~3khz. but these go flat above 5khz too.
  Reply With Quote

Reply


Visaton WS 17 E (8 ohms)Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
8 Ohm 2X12 Guitar Speaker cabinet - 2X4 Ohms in series or 2X16 Ohms in parallel? KP11520 Instruments and Amps 38 16th September 2013 11:00 PM
15 ohms (12 on ohmmeter) with 24 ohms resistor in parallel to bring to 8 ohms McIntosh Man Multi-Way 29 11th June 2010 05:36 PM
Did I kill my B+Ws allquiet Multi-Way 8 29th May 2007 08:16 PM
ISOBARIC 16 ohms load powered by 8 ohms Amp eddi0 Subwoofers 24 21st October 2006 03:29 PM
Visaton SC 10 N 8 ohms richie00boy Multi-Way 3 18th February 2005 08:23 PM


New To Site? Need Help?

All times are GMT. The time now is 11:13 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki