Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|28th June 2015, 09:06 PM||#1|
Join Date: Jun 2015
Alpair / Acoustic Elgance
I'm new here and looking for help with baffle dimensions and driver placement for my first project.
The following is my general concept:
- open baffle
- Alpair 7P
- Acoustic Elegance Dipole 18 woofer
- active crossover
- listening height of 50" off the floor
- probably a base of about 4 inches
- concerned most about smooth response and driver integration
I unsuccessfully tried to use the Edge program.
|28th June 2015, 10:50 PM||#2|
Join Date: Jul 2013
Blog Entries: 1
Cut the remainder into 42"x 11 1/2" strips, fasten 2 of these to the back of your panel as wings/supports- as little as a 1" gap from the bottom of your panel will tilt the baffle back signifiCANTly, as well as reinforcing your 18" er bass output.
Keep the drivers off centre, and about 3' apart, this should allow a blend as high as 175 hertz.
I would flush mount your Alpair; I wouldn't bother with the 18" subdriver.
If you're going active, you can tweak from here easily.
And hey- have fun out there!
So Schrödinger's cat walked into a bar.
And didn't .
|29th June 2015, 12:57 AM||#3|
Join Date: Oct 2001
Location: Victoria, BC, NA, Sol III
Blog Entries: 5
I can't say anything about the baffle you want, but the combo should be good. Take note that the A7p will need lots of break-in.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Alpair 10 vs Alpair 7 - Open baffle with boxed woofer. Passive Xover.||TiMBoZ||Full Range||58||3rd November 2015 03:07 AM|
|Best acoustic stuffing for Alpair 12P BR?||monty78pig||Full Range||16||24th April 2015 03:52 AM|
|Alpair 6p vs alpair 6m vs alpair 7||timreeves||Full Range||11||8th January 2013 04:37 PM|
|Alpair 12en in BIBen cabinet or Alpair 7 in fonken w/subs||tripathdude||Full Range||1||7th November 2010 06:04 AM|
|New To Site?||Need Help?|