One final question - diyAudio
Go Back   Home > Forums > Loudspeakers > Full Range

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old Today, 06:12 PM   #1
diyAudio Member
Join Date: Aug 2014
Default One final question

So i have finally convinced myself from where to begin, after so many questions about how stuff works, how to improve them, how to build. And now after so much that I got to learn from the community, it just now boils down to the driver selection.

Two drivers, Fountek FR58EX and Dayton Audio BMT-25.
Target application, small portable stereo wireless enclosure.

I need to put any two of those in a volume not greater than 0.05ft3.

1. Using this passive radiator, would this be of help covering the low ranges of Fountek FR58EX? For two of those would one suffice, or would two PR be required but in a common airspace or separate internal cabins? The reason I am asking for a PR is because that way designing a cylindrical enclosure wont be out of consideration.

2. With that Dayton Audio BMT driver(will be using two), if I cross it little high, I guess then enclosure volume wont matter much, so in that case using this sub I would be able to cover the lower ranges, right? There is a suggestion in the Q/A section down the page by one executive about an enclosure dimension being 5x4x3, internal using the same PR.

3. I am curious to know if there is any Linkwitz circuits used to improve the sensitivity range overall.

Thank you.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Newbie Question About Final Steps ppinto1 Tubelab 1 13th November 2013 02:14 PM
Final schematic, I think? jaymanaa Tubes / Valves 10 14th July 2006 06:47 AM
Final 0.3 els systema Planars & Exotics 14 14th May 2006 04:10 PM
Final 0.3's on Ebay robeight Swap Meet 0 14th October 2005 03:06 PM
A final question on grounding(yeah right!) mr mojo Tubes / Valves 2 13th August 2005 06:15 PM

New To Site? Need Help?

All times are GMT. The time now is 06:49 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2