Markaudio Alpair 10.3 OB with H-frame Eminence - Page 2 - diyAudio
Go Back   Home > Forums > Loudspeakers > Full Range
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th October 2013, 12:04 AM   #11
diyAudio Member
 
Join Date: Dec 2012
Here is the in-room response 1/6 octave smoothed. Sounds pretty good. I'd like the take these out to measure outdoors, I'd still like to deal with the dipole peak and rolloff, as well as any other anomalies.

I did add a couple of things to the Mini DSP Crossover -- first I added some delay to the LF driver using the out-of-phase null method (i.e. flip the phase of the LF driver in the MiniDSP program and adjust the delay until you get the biggest null at the X-over point), then flip the phase back. The drivers are time-aligned. I dropped the HF response a bit using a -1.5 db 1.5kHz shelving low-pass filter. Also did a broad -4 dB peak filter at 60 Hz (as you can see I have quite a bit of bass build up in my listening room). Also added back in my 25 Hz Q 2.2 peak filter to extended the low bass a bit.

Here is the response in-room. Since, I often listen at pretty low volumes, I don't mind the extra bass response. It sounds pretty balanced to my ears. I am getting nice summing at the x-over point, which is what I want.
  Reply With Quote
Old 6th December 2015, 01:27 PM   #12
Bigun is offline Bigun  Canada
diyAudio Member
 
Bigun's Avatar
 
Join Date: Jan 2009
Location: Waterloo, ON
Blog Entries: 2
Hi Dan - it's been awhile and I bet you've done quite a few experiments since you posted this - would be interested to hear about your experiences and advice based on what you have learned about OB ??
__________________
"The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed." Robert M Pirsig.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Markaudio Alpair 10 Bass Wide Drivers Musik007 Twin Audio 8 25th May 2016 06:21 PM
HT Front Stage Designs Using Markaudio Alpair 10.2 - Plans, Feedback and Build Log Ben_Tech Full Range 96 1st January 2015 11:41 PM
Tang Band W8-1808 / TB ribbon tweeter / Eminence Alpha 15A in OB with U-frame superlian Full Range 3 3rd September 2011 11:11 PM
FS: MarkAudio Alpair 10.2 Full-Range drivers nar93da Swap Meet 4 7th August 2011 09:36 PM
Markaudio's Alpair 10, German test and review mightyd Full Range 9 23rd April 2009 08:18 AM


New To Site? Need Help?

All times are GMT. The time now is 10:03 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2
Wiki