Upgrading JBL JRX-115 - diyAudio
Go Back   Home > Forums > Loudspeakers > Full Range

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 19th April 2013, 02:22 PM   #1
diyAudio Member
 
ClackS02's Avatar
 
Join Date: Mar 2013
Location: Kent, UK
Default Upgrading JBL JRX-115

Hey Guys,

I'm thinking of upgrading my Mid Highs with new drivers. there is nothing wrong with my current setup, but i would like more power without necessarily having to add more cabs (space saving).

Would anyone have any good suggestions....

the current low freq is a JBL M115-8A
the current high freq is a JBL 2412H-1

The current spec sheet is here > JBL JRX-115 SPEC SHEET
__________________
-Steve C
-DubRoach Production

Last edited by ClackS02; 19th April 2013 at 02:46 PM.
  Reply With Quote
Old 19th April 2013, 03:40 PM   #2
diyAudio Member
 
Join Date: Oct 2012
clackso2
have you thought about bi-amping these boxes before changing drivers?the removal of the passive x-over can be significant imho.

can a moderator move this to the multi way section or PA forum please.

Last edited by turk 182; 19th April 2013 at 03:55 PM.
  Reply With Quote
Old 22nd April 2013, 02:32 PM   #3
zouwi is offline zouwi  Finland
diyAudio Member
 
Join Date: Aug 2005
There is a reason for those specific elements.. In practice there is no possibility of getting more spl out of speaker by changing elements. Even if you found something that has otherwise identical but larger xmax and power handling, the enclosure would most likely begin to change radically its behavior because of unlinear compression and flow of air in vents. (This is why top quality PA-systems require their own processors which have dynamic eq-filters etc. for compensating enclosure unlinearity.)

Bi-amping is something to give a shot, just be careful with not blowing those drivers with too much power. Using two speakers side by side is not a good idea, you'll get massive problems with comb filtering at frequencies above about 1kHz.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
beyma MC-115 Sony Multi-Way 6 12th April 2013 03:08 AM
Sale: JBL 16" K145, JBL 8" 2118, JBL 2404 HF, Fane ST-5022 (Edgarhorn), Klipsch K55V ZERO1 Swap Meet 3 4th February 2013 12:03 AM
Help for Upgrading JBL HSL810's Needed techbiker Multi-Way 43 30th April 2012 06:09 PM
BSC, how well does 115/W perform Svante Multi-Way 9 6th April 2004 02:39 PM


New To Site? Need Help?

All times are GMT. The time now is 02:23 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2