diyAudio (
-   Full Range (
-   -   My CHR-70 build (

SirByrd 2nd March 2013 10:52 PM

My CHR-70 build
Whipped up 6 pairs of these:

SirByrd 2nd March 2013 10:53 PM

Not without damaging one of the drivers:
And the solution to that problem.

SirByrd 2nd March 2013 10:54 PM

Each one is made out of 1/2" bamboo plywood. Internal volume is 13.8 liters. Tuned to ~47Hz with a 1" diameter by 1.1" long port.

F3 is simulated to be 40Hz and I believe it. Haven't measured it yet though.

The baffle is relatively wide to reduce the effects of baffle step. There is no BSC or any filters in this speaker.
Just 10" of supra ~16 gauge wire between them at the terminals on the back.

Internal dimensions are all golden ratio.

eladmi 3rd March 2013 02:53 AM

Butiful build. Awesome work.


SirByrd 3rd March 2013 02:56 AM


wcwc 3rd March 2013 04:37 AM

Why do you need 6 pair?

SirByrd 3rd March 2013 04:41 AM

Made some for friends

zman01 3rd March 2013 06:40 AM

Beautiful work SirByrd. Lucky friends. :)

SirByrd 3rd March 2013 05:42 PM


osscar 3rd March 2013 05:43 PM

i like them too! very good work !

All times are GMT. The time now is 01:03 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2