Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Differences between voice coils
Differences between voice coils
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 10th January 2013, 12:06 PM   #1
slideman82 is offline slideman82  Argentina
diyAudio Member
 
Join Date: Oct 2007
Default Differences between voice coils

I'm a guitar player and I have a friend who builds speakers, mostly woofer and extended bass. I know about their frecuency range and some other characteristics, like voice coil length, conductor used, etc., but is there any notable difference between a guitar speaker voice coil and other like a medium range? We compared a well known guitar speaker (round copper voice coil) and one he reconed with an aluminium voice coil, with a signal generator, and the guitar speaker had great SPL at about 2 kHz and 3.5 kHz, that sure is what it makes its tone. The other one was more linear, reached up to 7 kHz but had no peaks.
  Reply With Quote
Old 10th January 2013, 12:49 PM   #2
xrk971 is offline xrk971  United States
diyAudio Member
 
xrk971's Avatar
 
Join Date: Oct 2012
Location: Metro DC area
Differences between voice coils
I would guess that the Al coil has lower mass so the resonant frequency is increased - as you observed.
  Reply With Quote
Old 10th January 2013, 01:08 PM   #3
slideman82 is offline slideman82  Argentina
diyAudio Member
 
Join Date: Oct 2007
Not really! That is a 13 or 14 mm long 2" coil for extended bass, and had a 45 Hz resonant frecuency... I think the same coil in copper has about 40-42 Hz. But my point is other: what makes the guitar speaker voice coil have huge SPL peaks at about 2kHz ad 3kHz.
  Reply With Quote
Old 10th January 2013, 01:30 PM   #4
chris661 is offline chris661  United Kingdom
diyAudio Member
 
chris661's Avatar
 
Join Date: Feb 2008
Location: Sheffield
It's not the voice coil, its the cone.

When driven at higher frequencies, the mass of the cone means the outer edge can't keep up with the inner edge, so mechanically disconnects (ie, the cone bends).

The upshot of that is that various resonances occur in the 2kHz+ range, which can produce peaks in the output (if properly damped, the frequency response can remain flat in spite of the resonances - a waterfall plot would, however, show them up as HF ringing).

Chris
  Reply With Quote
Old 10th January 2013, 02:24 PM   #5
slideman82 is offline slideman82  Argentina
diyAudio Member
 
Join Date: Oct 2007
Great! That's was I was looking for! Now I know what to tell my speaker man!
  Reply With Quote
Old 10th January 2013, 02:34 PM   #6
slideman82 is offline slideman82  Argentina
diyAudio Member
 
Join Date: Oct 2007
Thanks!
  Reply With Quote

Reply


Differences between voice coilsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
corroding voice coils pdan Full Range 15 30th August 2007 01:11 PM
Voice coils - too many, all must go. Toddy Audio Swap Meet 3 31st December 2003 03:46 AM
Dual voice coils Opie Multi-Way 1 19th December 2002 04:38 PM
paralleling voice coils Opie Multi-Way 1 15th November 2002 01:41 PM


New To Site? Need Help?

All times are GMT. The time now is 08:24 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki