diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Full Range (http://www.diyaudio.com/forums/full-range/)
-   -   TL-design box for W5-1611sa (http://www.diyaudio.com/forums/full-range/226734-tl-design-box-w5-1611sa.html)

Gost22 31st December 2012 06:16 AM

TL-design box for W5-1611sa
 
Hi all!
I need design for TL-box for full range speaker W5-1611sa.
What is the price of speakers for pair ?
Where can you buy?
Thank you!

P.S.
Merry Christmas and Happy New Year!
Cheers!:cheers:

xrk971 31st December 2012 11:09 AM

1 Attachment(s)
I think this driver may be discontinued - at least it is not available at PE anymore, the ferrite version of it is available however: Tang Band W5-1611SAF 5" Full Range Speaker 264-918 About $50 USD.

A good TL design by Bjohanessen is available on the TABAQ thread post number 482 at: http://www.diyaudio.com/forums/full-...g-band-49.html

Design is here: http://www.diyaudio.com/forums/attac...-w51611saf.pdf

The simulation looks very good, as all of Bjorn's TABAQ's usually are - flat as a board response in the bass department with extension down into 30 Hz - see attached image from Bjorn's sim. Give it a try, we are all wondering how it will sound.
Regards,
Xrk971

Gost22 1st January 2013 06:04 AM

Hi
Xrk971 thank you for your cooperation. Is someone made this TL-box and the sound it this speaker gives. Otherwise I have LM1875 audio amplifier and preamplifier with tube/valve ECC88 and I'd like to I create this TL-speakers with W5-1611sa.
Best Regards

xrk971 1st January 2013 11:56 AM

I don't think this has been built by anyone yet as Bjohanessen only provided the sims recently. Good luck with your build!

Gost22 2nd January 2013 02:18 AM

Hi all!
If I manage to get to the speakers I'll make TL-box.
Does anyone have these speakers made in any box (vented or compression box or etc).
thank you

chazdrumzalot 2nd January 2013 02:23 AM

Hi Gost, I have a pair of W5-1611 in a box of my own design. I think they sound awesome. :) I attempted a double bass reflex cabinet to reduce cone excursion but quite frankly my speakers cannot handle deep bass. Perhaps the TL design will work better, and to be honest, had this design been available last year I probably would have built that instead.

xrk971 2nd January 2013 02:30 AM

Chaz,
I thought that's what the speakers you had in the background behind the cornu photos were. I have always wanted to try a tabaq on a bigger driver. There is someone planning on doing it with the Betsy K driver - 45 in tall.

Gost22 6th January 2013 05:29 AM

1 Attachment(s)
Hi all!
Hi xrk971!
I made a TL-box for projects db616TL (Parts Express). Is this TL can adjust back box for full range speaker W5-1611sa?
What is the difference between the W5-1611sa and W5-1611saf?
Thank you for your cooperation.
Cheers!:cheers:

Gost22 6th January 2013 06:18 AM

1 Attachment(s)
Here are the box dimensions in mm (Figure 1)

planet10 6th January 2013 06:22 AM

Quote:

Originally Posted by Gost22 (Post 3312985)
What is the difference between the W5-1611sa and W5-1611saf?

The 1st has a neo magnet, the 2nd ceramic.

http://www.p10hifi.net/FAL/kermit/TB-W5-1611eN.jpg

dave


All times are GMT. The time now is 05:12 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2