What is the speaker for this number? 030510 - diyAudio
Go Back   Home > Forums > Loudspeakers > Full Range

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 7th December 2012, 07:01 PM   #1
diyAudio Member
 
Join Date: Sep 2012
Default What is the speaker for this number? 030510

I searched on google for ages... I don't even see a single speaker in the search results!
My speaker is 10 watts 8 ohms
6 x 1 3/4 inches (very odd indeed)
Can someone figure out what this number means? It's on the back of the speaker magnet shielding 030510
  Reply With Quote
Old 8th December 2012, 10:41 AM   #2
diyAudio Member
 
Join Date: Sep 2012
does anyone know?? o.O I wanted to figure out what speaker model it is so I can find a picture of it. but there is absolutely nothing on google!
  Reply With Quote
Old 8th December 2012, 11:21 AM   #3
diyAudio Member
 
Scottmoose's Avatar
 
Join Date: Mar 2005
Location: UK
It's likely just a manufacturer serial number. With almost nothing else to go on, I suspect identifying it will be extremely difficult.
  Reply With Quote
Old 8th December 2012, 12:31 PM   #4
diyAudio Member
 
Join Date: Sep 2012
ok umm.. the speaker is 6 x 2
8 ohms 10 watts

shouldn't there be a picture of something that's similar to that description?
Wait just found out It also has this labeled on it.
YDT516-A1
Searching on google still yields no results even resembling a speaker..

Okay After an hour of searching I finally found a Matching image of the speaker's I'm using.
http://www.sirenitas.lt/getImage.php...=YDT516-A1.jpg
They both came out of a old TV in a dumpster.
Both seem to be in brand new condition really clear sound quality
A slight amount of bass when in an open enclosure
running off a 400 watt amplifier (At very low volume so I don't hurt the speakers)
I have two matching speakers.. They are in a stereo configuration with my amplifier and my desktop computer.
What is your opinion on these speakers? I find they have a very odd dimension.. approximately 6" x 1" 3/4" but they do sound fairly clear and good sound quality.

Last edited by realflow100; 8th December 2012 at 12:36 PM.
  Reply With Quote
Old 11th December 2012, 05:00 PM   #5
diyAudio Member
 
Join Date: Sep 2012
so I guess no one has any clue how these speakers would best sound?
ported enclosure? sealed? T-line?
  Reply With Quote
Old 11th December 2012, 05:33 PM   #6
xrk971 is offline xrk971  United States
diyAudio Member
 
xrk971's Avatar
 
Join Date: Oct 2012
Location: Virginia
Make a flat wall mount transmission line like a hanging picture. See foamcore thread.
Easy and sounds good and low cost of materials to invest in. See post 16 in thread

Foam Core Board Speaker Enclosures?

Last edited by xrk971; 11th December 2012 at 05:35 PM.
  Reply With Quote
Old 11th December 2012, 05:51 PM   #7
sreten is offline sreten  United Kingdom
diyAudio Member
 
Join Date: Nov 2003
Location: Brighton UK
Hi,

It is a mass produced TV speaker. High Fs and high Qts designed
for effectively open baffle use in TV's, and probably the best way
of using them is very simple open baffles with boxed helper woofers.

They can't, won't and never will do proper bass in any arrangement.

rgds, sreten.
__________________
There is nothing so practical as a really good theory - Ludwig Boltzmann
When your only tool is a hammer, every problem looks like a nail - Abraham Maslow

Last edited by sreten; 11th December 2012 at 05:55 PM.
  Reply With Quote
Old 11th December 2012, 09:21 PM   #8
diyAudio Member
 
Join Date: Sep 2012
not even in a 12 inch by 12 inch by 12 inch ported box (Or sealed box) made of 1/2 inch thick solid steel?
i know thats kinda silly to think of but it would be epic if someone made such a thing xD

Last edited by realflow100; 11th December 2012 at 09:31 PM.
  Reply With Quote
Old 11th December 2012, 09:37 PM   #9
xrk971 is offline xrk971  United States
diyAudio Member
 
xrk971's Avatar
 
Join Date: Oct 2012
Location: Virginia
With a box like that you could use a nuclear powered driver to put out a megawatt of power.
Seriously, try a foamcore transmission line. Make a box about 20 in tall x 30 in wide and put dividers along 20 in direction to split into left and right channels and to double path to 40 in. Mount driver 1/3 from closed end, stuff 2/3 from closed end, make about 3 in deep. Wire it up and you will be surprised at how good it sounds. Doesn't take long at all. Make it out of foam core and the whole thing is a 2 hr project. See post 9 for picture.
Foam Core Board Speaker Enclosures?
  Reply With Quote
Old 11th December 2012, 09:40 PM   #10
sreten is offline sreten  United Kingdom
diyAudio Member
 
Join Date: Nov 2003
Location: Brighton UK
Quote:
Originally Posted by realflow100 View Post
not even in a 12 inch by 12 inch by 12 inch ported box
(Or sealed box) made of 1/2 inch thick solid steel?
i know thats kinda silly to think of but it would be
epic if someone made such a thing xD
Hi,

They don't have the excursion in the bass. The parameters don't care
about any box once its above a certain small size. You can't reduce
the Fs of a driver with simple boxes, or reduce its Qts, they go up.

Any decent driver designed to work in such a box would be far better.

rgds, sreten.
__________________
There is nothing so practical as a really good theory - Ludwig Boltzmann
When your only tool is a hammer, every problem looks like a nail - Abraham Maslow
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
number of watts fakeout Full Range 4 2nd April 2012 02:51 AM


New To Site? Need Help?

All times are GMT. The time now is 04:20 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2