DIY a baffle for JBL fullrange and super treble Celestion
I have a pair of JBL 2120 Pro and super treble Celestion ballet, I want to make a new baffle for them. I have find on internet already but didnot have any details for JBL driver like this :confused:.
Please could you help have a suggestion or document/picture drawing?
JBL 2120 Pro loudspeaker
Extended range transducer, 50hz to 8,000hz, Imp. 8 ohms, 60 watts contineous, 98db at 1w/1m, Fs=65hz, 3-inch edge wound aluminmum voice coil, BL=1.4x(10)7. Pictures too.
However this information provided by JBL is insufficient to design an enclosure (computer program or charts) with out other T/S parameters: Qes, Qms, Qts, Vas, Re, Le, Sd, Xmax.
Note that Qts can be calculated easily from Qes and Qms. Xmax should be known for a complete design. Sd can be estimated from the drivers frame size (results will vary with your estimate)
If you can not find the required T/S parameters, you can measure them easily with a WT 3 instrument available from Parts Express, see their on line catalog, page 168 $99.88usd.
Thanks Michael for quickly feedback,
I understand your advice, but I dont have much knowledge about this. I'm looking for a Bass reflex enclosure plan that can using for my JBL fullrange driver and supper treble HF-50 (optional). The baffle plan is as simple as good for me.
Any idea for this?
Thanks for any feedback
Please updated with more information details of JBL and Celestion treble
Hello, anybody here! Please help
|All times are GMT. The time now is 08:10 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright ©1999-2015 diyAudio