Hello to all !
I am a recent Acoustat Model 6 owner, after a long and varied history of speakers spanning a great many different models.
I'm really enjoying what the 6's have to offer, but wanted to integrate two subs into the system.
I would like to know if its possible, and if so, how to go about rolling off the bass in the Acoustat panels at 100Hz at 18db octave. I would like to do this passively, without using an active crossover, buffer or network of any sort. I dont want to try cap(s) on the amplifier inputs, as this will only give me a 3db slope(?)
I'm not as technical as most who post here, but can figure most things out, with a bit of help !
Thanks in advance.
Scott
I am a recent Acoustat Model 6 owner, after a long and varied history of speakers spanning a great many different models.
I'm really enjoying what the 6's have to offer, but wanted to integrate two subs into the system.
I would like to know if its possible, and if so, how to go about rolling off the bass in the Acoustat panels at 100Hz at 18db octave. I would like to do this passively, without using an active crossover, buffer or network of any sort. I dont want to try cap(s) on the amplifier inputs, as this will only give me a 3db slope(?)
I'm not as technical as most who post here, but can figure most things out, with a bit of help !
Thanks in advance.
Scott
Are they going to be powered by a separate amp?
You could look into the miniDSP and do it digitally.
Subs are both active Rel Stentors.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.