Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Speakers full-range with a high resistance.
Speakers full-range with a high resistance.
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 27th August 2012, 09:21 AM   #1
Svjatoslav is offline Svjatoslav  Ukraine
diyAudio Member
 
Join Date: Jun 2010
Location: Berdyansk, Ukraine
Speakers full-range with a high resistance.
Default Speakers full-range with a high resistance.

Self-designed full-range speaker with a high resistance. Especially for transformerless tube amplifiers. Rated impedance 1000 ohms. However, he has a very weak dependence on the frequency of resistance at medium and high frequencies. Provisional title 10GDSH-1-1000.
Diameter of 8 inches
Attached Images
File Type: jpg 4501742.jpg (70.3 KB, 1300 views)
File Type: jpg 10ГДШ-1-1000 №9, №10 зад.jpg (86.8 KB, 1264 views)
File Type: jpg 10ГДШ-1-1000 №9, №10 перед.jpg (105.9 KB, 1252 views)

Last edited by Svjatoslav; 27th August 2012 at 10:03 AM.
  Reply With Quote
Old 27th August 2012, 10:02 AM   #2
Scottmoose is offline Scottmoose  United Kingdom
diyAudio Member
 
Scottmoose's Avatar
 
Join Date: Mar 2005
Location: UK
Nice job; first units of this type I've seen since the old Philips 800ohm drivers from the 1950s - '60s.
  Reply With Quote
Old 27th August 2012, 10:11 AM   #3
Svjatoslav is offline Svjatoslav  Ukraine
diyAudio Member
 
Join Date: Jun 2010
Location: Berdyansk, Ukraine
Speakers full-range with a high resistance.
Thank you!
In his designs try to get rid of reactive elements as possible. In this case, despite the multi-layer coil was reduced reactive parameter - inductance.

Last edited by Svjatoslav; 27th August 2012 at 10:30 AM.
  Reply With Quote
Old 27th August 2012, 10:32 AM   #4
Svjatoslav is offline Svjatoslav  Ukraine
diyAudio Member
 
Join Date: Jun 2010
Location: Berdyansk, Ukraine
Speakers full-range with a high resistance.
A scheme in which they work.
Attached Images
File Type: jpg Zirklotron engl. JPG.JPG (84.9 KB, 1236 views)
  Reply With Quote
Old 5th March 2013, 09:43 PM   #5
Svjatoslav is offline Svjatoslav  Ukraine
diyAudio Member
 
Join Date: Jun 2010
Location: Berdyansk, Ukraine
Speakers full-range with a high resistance.
Succeeded in producing a full-range speakers impedance 2000 ohms. Complete with amplifier for tubes 6C4C. Frequency range of the complex 40 - 20 000 Hz.
Attached Images
File Type: jpg shedule impedance.JPG (106.4 KB, 1128 views)
File Type: jpg V. 4 .jpg (511.9 KB, 320 views)
  Reply With Quote
Old 6th March 2013, 05:45 PM   #6
otc is offline otc  Denmark
diyAudio Member
 
Join Date: Aug 2011
Speakers full-range with a high resistance.
Very impressive. Congratulations to Your fine work.
I have a Philips amplifier for 800 ohm speakers and have puzzled with the idea of rolling voicecoils for existing low-impedance units.
You are rolling voicecoils Yourself?
I am interested in hearing Your experiences with this work. And the challenges.
  Reply With Quote
Old 6th March 2013, 10:46 PM   #7
Svjatoslav is offline Svjatoslav  Ukraine
diyAudio Member
 
Join Date: Jun 2010
Location: Berdyansk, Ukraine
Speakers full-range with a high resistance.
Voice coils are made to order, using special equipment, according to my drawings.
If You notice, these speakers have very low inductance. It is much lower than that of their counterparts of low resistance.
Do You have a Philips 800 ohm speakers?
You could not measure their Z, Phillips 800 ohms at a frequency up to 200 kHz?
It is very necessary for comparison.
Here's what's interesting. Sound from low-inductance full-range speakers to a "normal" 8 ohms is very different from the sound of the same full-range speaker, but with a "normal" inductance.
Inductance frequency dependent.
Therefore it was necessary to introduce the term "doubling the minimum impedance " F2z.
Typically F2z=7-15 kHz for full-range speakers.
The same was observed with high-resistance full-range speakers.
It would be ideal if F2z exceeded the sound range.
As is the case in high-frequency speakers. Better if twice F2z = 31-40 kHz.

Last edited by Svjatoslav; 6th March 2013 at 11:05 PM.
  Reply With Quote
Old 6th March 2013, 11:01 PM   #8
sreten is offline sreten  United Kingdom
R.I.P.
 
Join Date: Nov 2003
Location: Brighton UK
Hi,

FWIW AFAIK you could never sell commercially any speakers
of ~ 1Kohm and any amplifier that is capable of driving them.

The standards just don't exist for high voltage speaker drive,
and though no expert, I'm sure you'll fall foul of the allowed
standards for whatever speaker connection method you use.

rgds, sreten.
  Reply With Quote
Old 6th March 2013, 11:21 PM   #9
Svjatoslav is offline Svjatoslav  Ukraine
diyAudio Member
 
Join Date: Jun 2010
Location: Berdyansk, Ukraine
Speakers full-range with a high resistance.
Phillips was the standard of 800 ohms?
So why not be the 2000 ohms?
.................................................. .............
Such systems are already working in Ukraine, more than a year.
The first of these resistance of 1 000 ohm. Two-way.
Two months operates two full-range speakers impedance 2000 ohms.
.......................................
I am an engineer. Itself can develop the standard. In the extreme case)))
Especially if there's a good theory, and not just one hammer for its implementation. )))

Last edited by Svjatoslav; 6th March 2013 at 11:34 PM.
  Reply With Quote
Old 7th March 2013, 12:37 AM   #10
sreten is offline sreten  United Kingdom
R.I.P.
 
Join Date: Nov 2003
Location: Brighton UK
Hi,

You can't develop the "standard". It will always
be illegal in terms of consumer products to sell
an amplifier that can drive your speaker units,
with any form of current speaker connection.

Stupid but true AFAIK.

rgds, sreten.

I don't know what the actual voltage limits are.

Last edited by sreten; 7th March 2013 at 12:41 AM.
  Reply With Quote

Reply


Speakers full-range with a high resistance.Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Power supply:Universal AC input/ Full range,High Efficiency, and High reliability hang Vendor's Bazaar 12 24th July 2009 04:46 AM
Waterproof high efficiency full range? midside Full Range 4 23rd April 2009 04:46 PM
High SPL full range design? JoeM Multi-Way 5 7th March 2009 09:45 PM
Frequency range of the human voice & full range center channel speakers jwmbro Multi-Way 31 20th January 2008 04:07 PM


New To Site? Need Help?

All times are GMT. The time now is 05:54 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki