Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Lowther DX3 Cabinet, what too do?
Lowther DX3 Cabinet, what too do?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 11th August 2012, 01:43 AM   #1
magnetman is offline magnetman  Australia
diyAudio Member
Join Date: Jun 2011
Location: Hobart Australia
Question Lowther DX3 Cabinet, what too do?

Hi all,
I am looking at a diy cabinet for DX3's, I have to say my head is spinning there are so many options!

I have purchased a pair of Lowther DX3's from the common sense audio crew, I have plans for their 2.8 bass reflex cab. I have spoken to Lowther they suggest the Fidelios. I have a mate recommending I investigate infinite baffle (closed box) And have come up trumps for information on that. There is also the voight pipe and it goes on and on.

Anyone got a suggestion?

The room I intend to use is (W)3.5m x (L)4.5m x (H)3m I will set up along the narrow end as its the only place that is logical given the placement of architectural fixtures. the floor is timber it has a large rug covering 3/4 of the area. The room has a medium liveliness.

My music tastes range from 20th century classical too metal, from jazz to experimental through rock and alternative.

ohh yeah the amp is a Tubelab SE 300b.

Thanks for reading.
  Reply With Quote
Old 11th August 2012, 01:55 AM   #2
Bare is offline Bare  Canada
diyAudio Member
Join Date: Dec 2001
Location: vancouver
Been there done that..in mid 80's. Spent 2/3 years Dicking with the things.
Problem was that they have 'glimmerings' of being quite Good.
But (in my case at least) it was ephemeral. Just like Farming, one good result makes one put up with /hope for another good year/result.
Hey! it's just around the next corner :-).. never happens though, just like wining the lottery, it happens to someone else...decided Life's too short imo.
Ever wonder WHY? there are more box designs than mfg'd Lowthers ? IMO Cuz none actually work as expected :_)
Finally sold the things in Disgust.. with never a second thought.
Good luck though..as for many, the quest is everything.

Last edited by Bare; 11th August 2012 at 01:58 AM.
  Reply With Quote
Old 11th August 2012, 04:13 AM   #3
talaerts is offline talaerts  Belgium
diyAudio Member
Join Date: Oct 2005
Never make a BR box for a Lowther, it won't work. I don't understand why the common sense people show so little common sense in that.

The Fidelio (which I have not heard) is a modern design by Lowther itself, I believe they also sell or sold the ready made speaker so it should be reasonable.

But I would first investigate Martin King's well documented MLTL (which looks superficially like a bass reflex, but it isn't) design. This allows you to get some bass with a reasonably sized enclosure.
Several pages, plans and strongly recommended BSC filter are here:
Lowther DX Series of Drivers in a ML TL Enclosure
You can always install double speaker binding posts on this box with one pair bypassing the correction filter so you can try your preference.
  Reply With Quote
Old 11th August 2012, 10:28 AM   #4
Melon Head is offline Melon Head  Australia
Join Date: Nov 2006
Forget about a cabinet and build a Slot loaded open baffle.
  Reply With Quote
Old 11th August 2012, 11:15 AM   #5
Circlomanen is offline Circlomanen  Sweden
diyAudio Member
Join Date: Sep 2004
Location: Göteborg
If you want some bass out of them i would rekomend the BIB. They are large back-loaded corner-horns that is easy to build. They sound very full and powerful, and i think that would be a very good match to the Lowthers quite strong personality. Lowther can sound wonderful, but they are not so easy to get most out of. You have to work to get there.

We live in a horizontal world, why use vertical topologies???
  Reply With Quote
Old 11th August 2012, 11:25 AM   #6
Scottmoose is offline Scottmoose  United Kingdom
diyAudio Member
Scottmoose's Avatar
Join Date: Mar 2005
Location: UK
A BR is not impossible with a DX3 assuming a high output impedance amplifier, although I'd want a properly designed one & not the CSA 2.8ft^3 box. You won't get particularly great LF extension though, and dynamic range will be limited since it's no different to an MLTL in almost certainly requiring some shelving filters.

Sealed will have zero useful LF output, but it would be practical were you to use the DX3s as wideband mid-tweets with supporting bass drivers (what people nowadays have an obsession for calling a 'FAST' system: a loathsome and irritating moniker for what is simply a 2-way with a relatively low XO frequency).

A back-horn is probably closest to what Lowther originally intended for the drivers; there are plenty of designs out there. Just make sure it's the largest you can practically use. A BIB is simple, if tall, effective, and in fact is the closest thing around to the original Voigt (no 'h') horn / pipe. They are essentially just tapped conical horns and since they usually have a wider gain BW than an MLTL or BR, you may require less corrective circuitry.

Lowthers work as expected. Assuming a competent designer, so do the boxes (although there have been many poorly designed enclosures for Lowthers over the years). However, all design is a compromise, Lowthers are also idiosyncratic units, not everybody likes this, and if you don't, that means they are hard work since you will need multiple filters, and the end result still isn't likely to appeal to someone who doesn't really care for that sort of sound in the first place.

Last edited by Scottmoose; 11th August 2012 at 11:28 AM.
  Reply With Quote
Old 11th August 2012, 03:49 PM   #7
larryldspkr is offline larryldspkr  Canada
diyAudio Member
larryldspkr's Avatar
Join Date: Nov 2007
I think Bob Brines has a nice MLTL cabinet design for this driver!

  Reply With Quote
Old 11th August 2012, 04:09 PM   #8
Bob Brines is offline Bob Brines  United States
diyAudio Member
Bob Brines's Avatar
Join Date: Jan 2003
Location: Hot Spring Village AR
Originally Posted by larryldspkr View Post
I think Bob Brines has a nice MLTL cabinet design for this driver!

I do PM me.

  Reply With Quote
Old 11th August 2012, 10:03 PM   #9
magnetman is offline magnetman  Australia
diyAudio Member
Join Date: Jun 2011
Location: Hobart Australia
Thanks everyone,

Mellon Head I like the idea unfortunately I can't spare much space. I have a maximum of 1m out from the wall.

Scottmoose I have been considering the idea of a two way, even a 3 way with a super tweet.
Back to single driver, I was looking at a back loaded horn yesterday called the Alfredo, the few that have commented on it like it.

Has anyone else heard of the Alfredo? what do you think?
  Reply With Quote
Old 11th August 2012, 11:42 PM   #10
Melon Head is offline Melon Head  Australia
Join Date: Nov 2006
I wouldn't rule it out. Even 1m is ok. You can also make the baffle smaller. There are no hard and fast rules (no pun intended)

Last edited by Melon Head; 11th August 2012 at 11:55 PM.
  Reply With Quote


Lowther DX3 Cabinet, what too do?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
lowther dx3 in sachico slr 5000 Full Range 7 4th May 2012 10:48 AM
Lowther DX3 questions ?? Leonidas Full Range 18 7th July 2010 05:33 PM
Lowther DX3 in a BIB Leonidas Full Range 16 23rd October 2008 04:25 PM
pair of Lowther DX3 adason Swap Meet 0 29th December 2006 03:28 PM
Help needed about Lowther DX3! Sclalars Full Range 6 28th May 2006 09:08 PM

New To Site? Need Help?

All times are GMT. The time now is 04:03 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio