Jensen 12's help - diyAudio
Go Back   Home > Forums > Loudspeakers > Full Range

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 5th July 2012, 09:44 PM   #1
diyAudio Member
 
new2tubes2's Avatar
 
Join Date: Dec 2011
Default Jensen 12's help

I have these old Ampro 1x12 cabs, and I fear (ruh-roh) i did 'em in playing bass through them (it's only a dual 6v6 amp, but it IS still bass guitar, not a 50's movie soundtrack). i have loved the tone and voice since day 1 and until i played through them LOW i didn't notice anything problematic. but at low levels, there's a very faint distortion. It almost sounds like a second signal is mixed with the first, and this second signal is very faint, but run through a horrible solid state fuzzbox.

The frame numbers are 1) 220216 18820 P12 N (or M)3 C5625 cone: 4950 1

2) 220741 16641 PM 12 B C444C cone: W360

What I'm seeking here is advice for any and all options i have. Troubleshooting? Worth reconing? What sort of replacements sound like these? Shop fleabay for 2 more p12's?

I finally found "my tone" and i think it's the sound of dying drivers... figures.
  Reply With Quote
Old 6th July 2012, 06:27 PM   #2
diyAudio Member
 
Join Date: Sep 2007
Dual 6V6 output should not hurt those speakers. I wound if you have an amp problem. Perhaps a micro phonic tube in the preamp section or a bad solder connection somewhere. Try putting the amp through the paces with a different speaker setup to see if the noise remains. If the electrolytic caps in the power supply are original they might give a noise problem as well. Those are fantastic alnico guitar speakers: hold onto them!

Jp
  Reply With Quote
Old 7th July 2012, 05:13 PM   #3
diyAudio Member
 
Join Date: Sep 2007
Someone should move this over to the musical instrument section. There will be plenty of experience in that forum to help.

Jp
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Jensen JT-11P-1 line transformer WTB/WTT: Jensen JT-DB-E jsmith1 Swap Meet 0 26th August 2011 11:06 PM
My new Alpair 12's Woody1911a1 Markaudio 63 4th December 2010 08:37 PM
Lab 12's ? FlipC Subwoofers 0 1st October 2009 10:03 PM
4 12's box design bulldogfreddy Car Audio 47 21st January 2008 06:19 AM
Avalanche 12's available noah katz Subwoofers 0 25th January 2006 07:00 AM


New To Site? Need Help?

All times are GMT. The time now is 08:27 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2