I was given my ex-father-in-law's speaker, and was trying to find out more about it. From what I understood, he got it in the late 60's or early 70's for a mono (not stereo) setup.
The info I'm able to get from the cabinet is the following:
Manufacturer: International Electronics, Cleveland Ohio
Model Number: Professional Series 8
Cabinet Dimensions
External: 21.5 x 12 x 9.5
Internal: 20 x 10.5 x 7 (24 liters, not counting woofer and port displacements)
port: 4" ID x 5.25 long
The only part number I can find on the driver is on the back of the cone:
21981
Here are some pictures of the cabinet markings and the driver, and measurements I made with a WT3.
Can anyone identify the driver used in this speaker?
The info I'm able to get from the cabinet is the following:
Manufacturer: International Electronics, Cleveland Ohio
Model Number: Professional Series 8
Cabinet Dimensions
External: 21.5 x 12 x 9.5
Internal: 20 x 10.5 x 7 (24 liters, not counting woofer and port displacements)
port: 4" ID x 5.25 long
The only part number I can find on the driver is on the back of the cone:
21981
Here are some pictures of the cabinet markings and the driver, and measurements I made with a WT3.
Can anyone identify the driver used in this speaker?
Attachments
Last edited:
I found a similar 8" full range made by Beyma. Maybe the one I have is an earlier version.
http://profesional.beyma.com/ingles/pdf/8AGN.pdf
Anyway, the Beyma might be similar enough to match up for a pair of shop speakers.
http://profesional.beyma.com/ingles/pdf/8AGN.pdf
Anyway, the Beyma might be similar enough to match up for a pair of shop speakers.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.