diyAudio (
-   Full Range (
-   -   Wanted 12"x 2 full range drivers (

pedro11 10th March 2012 07:40 PM

Wanted 12"x 2 full range drivers
Wanted 12" full range drivers must handle in excess of 100 watts RMS . 8ohms prefer. Has anyone got any suggestions please .I perhaps should have said I have made tapered horns for domestic use it is only running at 4.5 K at the moment . Very prototype at the moment Thanks


IG81 10th March 2012 08:02 PM

Seems many folks like Beta 12LTA and it fits your requirements thus far. :)


gafhenderson 11th March 2012 11:16 AM

i couldn't get the Beta 12LTA, so i bought 2x Fane 12-200LT. it was likened to the eminence driver in a thread i found on here. i've not done a whole lot with the driver yet to really make sufficient judgement on their sound.

pedro11 11th March 2012 02:25 PM

Thanks guys .
it all started last year . I made tapered cabinets convex fronts & convex rears . The 3 way compartments are all separate from each other .Then I thought can I make a tapered horn for the bass horn out of 1/16" ply it goes through the back of the cabinet & then a right angle upwards .Thats when the headaches started . Have you ever tried to roll ply cross grain you have to wet it for 24 hours . I then coated the inside with 3 layers of resin which has a least tripled the thickness very inert . I can take it in & out to try different drivers . 3 so far .Then another brain storm came along is there a driver about 25hz to 20k available 12" diameter . So that is where I am at the moment . I am very pleased with the sound.


All times are GMT. The time now is 05:05 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio