Windermere^2 with WR125st plus ERT26

jonastus · 19th November 2011, 02:15 PM

does this design would work or I better stick with the el70 speaker in it

zman01 · 19th November 2011, 03:34 PM

Do a search on the forum - IIRC there was one member who built a pair with EL-70 and was very happy with the results. EL70 works in a lot of other designs too - so if you want to build something else later, you can use them.

Cal Weldon · 19th November 2011, 04:19 PM

Well, I have both and appreciate them both but for different reasons. The 125's with tweeter are a little more to my liking as the highs are more prominent but those little EL 70's, while a "softer" sound, never cease to amaze. Can't say I prefer one over the other, sorry. Never mind the woofer in the center, it's no longer a part of the mix.

jonastus · 20th November 2011, 10:28 PM

so I be better to build the rosa enclosure for the two wr125st since its for h.t. use ?

planet10 · 20th November 2011, 11:11 PM

The enclosure for 2xWR125 is Calhoun.

dave

jonastus · 21st November 2011, 11:38 PM

and where could I found it ?

Cal Weldon · 22nd November 2011, 12:14 AM

I think Dave might know where and the nice thing is, it's a simple build. Here's the inside:

planet10 · 22nd November 2011, 02:04 AM

Quote:

Originally Posted by jonastus

and where could I found it ?

Bottom of the table, in the middle

The Spawn Family of Double Horns

dave

jonastus · 22nd November 2011, 03:01 AM

thanks a lot

jonastus · 27th November 2011, 01:49 AM

whats the advantage to put the second speaker on the side wall because I find the box more beautiful with the 2 speaker in front

and I will save the tweeter for an other project to

19th November 2011, 02:15 PM	#1
jonastus diyAudio Member Join Date: Jan 2006 Location: quebec	Windermere^2 with WR125st plus ERT26 does this design would work or I better stick with the el70 speaker in it

20th November 2011, 11:11 PM	#5
planet10 frugal-phile(tm) diyAudio Moderator Join Date: Oct 2001 Location: Victoria, BC, NA, Sol III Blog Entries: 5	The enclosure for 2xWR125 is Calhoun. dave __________________ community sites t-linespeakers.org, frugal-horn.com, frugal-phile.com ........ commercial site planet10-HiFi p10-hifi forum here at diyA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Windermere^2 - anyone built these?	tli	Full Range	12	14th February 2012 10:57 AM
Tweeter #3 (CSS ERT26) makes a great Supertweeter	Toppsy	Markaudio	1	6th July 2011 03:19 PM
FR125SR and ERT26	mikorist	Full Range	2	11th February 2011 08:56 AM
New WR125ST TL design	Timn8ter	Full Range	43	16th June 2005 07:36 PM
WR125ST quadpole?	audiobomber	Full Range	23	24th May 2005 10:23 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th November 2011, 03:34 PM	#2
zman01 diyAudio Member Join Date: Feb 2011 Location: Dhaka	Do a search on the forum - IIRC there was one member who built a pair with EL-70 and was very happy with the results. EL70 works in a lot of other designs too - so if you want to build something else later, you can use them.

20th November 2011, 10:28 PM	#4
jonastus diyAudio Member Join Date: Jan 2006 Location: quebec	so I be better to build the rosa enclosure for the two wr125st since its for h.t. use ?

21st November 2011, 11:38 PM	#6
jonastus diyAudio Member Join Date: Jan 2006 Location: quebec	and where could I found it ?

22nd November 2011, 03:01 AM	#9
jonastus diyAudio Member Join Date: Jan 2006 Location: quebec	thanks a lot

27th November 2011, 01:49 AM	#10
jonastus diyAudio Member Join Date: Jan 2006 Location: quebec	whats the advantage to put the second speaker on the side wall because I find the box more beautiful with the 2 speaker in front and I will save the tweeter for an other project to